☰

How to put the door curtains correctly? Do-it-yourself installation of entrance doors: the order of work and instructions for the installation of entrance doors. The order of installation of rose structures

Among the usual sights of the entrance doors, metal doors are the most authoritative and long-standing ones. Most of the stench is restored by specialists of repair companies. However, it significantly increases the number of doors, as they themselves are not high on their own. To that, the installation of the entrance doors with their own hands to the rich people. Installation technology does not require special skills, for independent installation, it is necessary to know the specific features of the process.

Preparation before installation work

The first step is to proceed to the current work and put food, like installing metal entrance doors, it is necessary to remove the old door on the back. The dismantling of the next is carried out with extreme care, so that the opening does not collapse too much - depending on the security of the process.

Pokrokovy dismantling of doors

  • Taking the old canvas. Door hinges can be of two types - unrecognizable, just like a twist, starting the robot, and znimni. In another case, it is necessary to open the door and, lifting the canvas behind the help of a great crowbar, fixed under the bottom edge, take it out of the hinges.
  • Poshuk mіsts krіplennya. To remove the old reinforcement, you need to take all the balls - tapestries and plaster or putty. Like a metal box, then you will see the anchor or small pieces of reinforcement, yak, in places of contact, it is necessary to see the grinder. Then we need to carefully see the old box, or beat it so that it doesn’t collapse.
  • View of the wooden box. On the back, it’s necessary to cut the flanks of the stitches, and then we’ll just vilamate them with a crowbar or a crowbar. If the curvature of the sidewalls is left, it is no longer possible to tidy up the lintel and the threshold.

Opening preparation before installation

After dismantling works on old doors, it is necessary to prepare the box before installing it. It is necessary to see everything on the back of the head that can swell - bits of putty, parts of the stone and other smittya. After such research has been carried out, the answer may significantly expand. The big empty ones, which have been settled, should be laid down with a whole, and the small gaps should simply be covered with cement rosemary, which is overfilled. Be aware that you are overcoming the future installation, it is necessary to clean it up. For whom you can beat two types of tools - a hammer with a chisel or a grinder with a special cutting disk.

Door frame preparation scheme:

  • Re-checking the logs under the bottom of the door frame. Previously, old spores were built with a wooden beam, which was placed under the door frame. If wine has already become rotten and crumbled, it is necessary to replace it.
  • Bar overhaul. One and the same beam may look normal, but it is rotten in the middle. To know, singsongly, about the attachment of a bar, yogo wood should be twisted with an awl. For the first time, build in the wood with the garnim zusilly, and steal the sprat once. Let's blame it. If the timber is attached for further exploitation, then the awl enters the same importantly and slightly, and if the wood crumbles when it is cut, then it is necessary to take it out.
  • Bar replacement. It is necessary to trim the timber after the rosemaries with a special rozchin for molding, and then lay it on the front plate. Then let's lay down a stone masonry for the beast, and cover the gaps with roses.
  • Clarifying measurement of the aperture. It is necessary to accurately measure between the boulder jambs and between the upper and lower points of the door opening. Clearances between the overall block and wall of guilt become smaller by 20-25 mm from the skin side. The situation may turn out to be good, if the door opens, either expand, or, navpaki, work yoga.

Important! The bar must be re-verified at various places.

Opening expansion

How to install the entrance doors with your own hands, if the opening appears to be too narrow? Golovne zavdannya, as an hour of expansion can be set in two ways:

  • Cutting. Tsey method of the greatest extensions through financial mirkuvannya. You can expand the box by cutting either from one side or from two. After the completion of the process, open the next inspection and plastering.
  • Rizka. The advantage of such a technique lies in the fact that yoga can be applied for all kinds of walls, including bearing ones. The minuses are financial vitraty and the presence of a special possession (Bulgarian) with a diamond disc.

Opening sound

In the process of changing the rozmіrіv, it is necessary to vrahuvat the supremacy and integrity of the future opening. For this, it is better to tie the supplementary structure to the main wall with reinforcing battens. Starry look a sounded opening is distinguished by one of three basic methods:

  • Tselyan masonry. Robotic laying can be carried out in two ways - either in one or a sprat of zeglin. There will be no principle difference. Golovnya - a necessary expansion. can be carried out already in three days after the completion of the whole work, and the installation of the door leaf is allowed no earlier than 10-14 days.
  • Sounding concrete.
  • Installation of double doors. This method is a miraculous alternative to the two in front.

However, in view of them, the opening of the opening can be permanently changed, turning and closing a small chair, if the situation is important, for example, when large-sized objects are moved.

After the completion of the above listings, we will open the doors and prepare them again until the doors are installed.

Installation of outside doors

The installation of entrance doors to the apartment is carried out for dekіlkom motives:

  • like a miracle defender against robbers;
  • how good is the insulation to sound and heat;
  • as a pleasant decor element.

The structure of the saloon doors is made up of door frames, stiffener ribs (framework) and outer surfaces. Between the metal ribs there is a special soundproofing material, and the frame is sheathed with metal or other sheet material (the so-called budget option).

Sob the sound of the hour of slamming is not too loud, a humic thickener creeps up to the porch, which significantly reduces the noise effect.

Door preparation

Entrance doors can be locked at the foreman with already built-in locks. The best option, because the installation of additional elements will require proper legality and, obviously, an additional hour. When attaching doors with locks, it is only necessary to fasten the handles with screws in the appointed place and obov'yazkovo reverify all the locks and slams, as if they were guilty of pracsyuvati, like clockwork. After a small test, you can proceed to the installation of metal entrance doors.

When installing doors that go out directly onto the street, you can, like an internal insulation, beat up polystyrene or wake up. During the operation of stone wool, it is necessary to seriously zashparovuvat doors - tightly, to that cotton wool may have hygroscopic power, as it can lead to rusty doors in the middle.

Lakofarbove covering when installed, it is better to protect it with masking tape, which should be glued around the entire perimeter. After the installation of door trims, the adhesive tape can be removed. For laying darts, as if guilty, pass through the doors, it is necessary to put up barriers in the back - plastic pipe chi corrugated sleeve.

Door fixing options

Fixation of doors to the box can be realized on the basis of three methods:

  • drowning way. The essence of the process is to screw the doors without a middle into the wall with bolts, for which to drill in front of them, open the technological gaps. At the end, the bolts should be masked with plastic plugs of a similar color.
  • On mounting plates. Fastening is carried out on a protruding door block 3 or 4 plates, in which there are openings for mortgages. With the correct placement of the door frame, a gap of 10-20 mm is to blame. Then let us open the fronts of the steel straight ahead, the other ends of some of them are either welded or riveted. As an alternative option to replace the direct vikoristovuyutsya anchor bolts and fittings.
  • Combinations. This method is transmitted parallel to the robot by the two methods described above at the same time.

Sequence of installation of entrance doors

Do-it-yourself installation of metal entrance doors is a process that can be divided into a few parts:

  • Front fixation of the door frame. It is necessary to put the box on the back in the open, on special mounting pads, the height of which can reach 2 cm. Potim її sled to fix with wooden bars (wedges), the comrades of such is guilty of trochs to re-visit the gaps between the metal frame and the wall. The number of such fixators sound to become 3 pcs. from the skin side and 2 to the beast. After driving in the wedges, it is necessary to re-examine the evenness of the construction with a budding equal time.
  • Fastening boxes. Open the back at the wall through a special transfer of metal bars. In order not to have mercy in the deep opening that is being drilled, you can apply masking tape to the drill approximately 10-15 cm. .
  • Front door leaf revision. When the canvas is visible, it is necessary to fasten the doors in order to perekonatisya in the same way. Vin can be smooth, without everyday zusil. After testing the door leaf, you can re-take it.
  • The braces are reinforced. After re-checking the doors, you can fix all the elements of fastening, with a residual tightening.
  • Zapovnennya promіzhkіv. special respect at this stage, merit is not a mounting pin, as it is most often won, but a cement one. Itself vin nadiyno zapovnyu all empty, guaranteeing additional defense against the evil apartment. The pin can be easily seen, by the same token, access to the metal reinforcement.
  • Completion of work. We need to hang the doors on the back, then we will carefully cover all the hinges and install decorative linings.

Important! During the process of installing skin anchors, it is necessary to take care, so that the design does not break. Tse postyno sled kontrolvati schilom or budіvelny equal.

Features of the installation of metal doors against the wall from different materials

No one knows how to install a hall door into a wooden booth. For whom it is necessary to know a few of the basic principles, so that you can significantly simplify the working process:

  • Wood will shrink up to 8-12 cm.
  • When mounting robots, it is possible to twist only more ovn_shnі loops and napіvzhorstke krіplennya.

When installing metal doors with your own hands in a booth with a foam block, a gas silicate block, polystyrene concrete, through a German material, you need additional information:

  • Special zastavnuyu detail;
  • steel mechanism;
  • Wooden spore.

For frame and shield budіvel, like additional rosettes and stіyki, vicorist wooden beam.

When the entrance doors are installed at the panel Khrushchev, it’s a good idea to add additional sound and heat insulation, which, unfortunately, cannot boast of tightness of the stink.

Installation of wooden entrance doors is carried out carefully through aesthetics and price availability, and may be especially installation. We need to bring the necessary tools, stained glass materials(Sealant, flowers, self-tapping, additional elements). Let's carefully carry out the dismantling of the old block, we can't do without fittings for the entrance doors.

To understand how to properly install wooden doors, it is necessary for the cob of understanding that the windows are different in design (filon parts from an array of wood, frame shields, glue sticks, on a metal base), shapes and dimensions (rectangular, arched, individual) also to the type (Vulichna for a private home-ownership or for a walk-away maidanchik of a rich apartment booth).








Wooden canvas can be single, one-and-a-half, folded. Processing technology is embodied in the folding, installation and specificity.

Elements of wooden doors include:

  • canvas
  • initial attachment for the security of mobility (open-closed);
  • fixators pid closed hour;
  • fittings (hinges, handles and locks, vіchko, closer, emphasis, armor plate, protisom);
  • decorative storage parts (leftover, loot).


Everything can be bought as okremo, so in a set at a selected or practically selected station.

Transfer of necessary tools

A set of tools for installing wooden entrance doors:

  1. roulette;
  2. budіvelny rіven (importantly laser);
  3. perforator;
  4. Bulgarian;
  5. a sledgehammer with a hammer;
  6. drill;
  7. anchor;
  8. material for laryngeal opening (mounting pin or cement rozchin).


Instructions from the installation

The door wooden block is the same box and canvas, hung with a hanging system. Do-it-yourself installation of wooden entrance doors in the preparation of these parts and installations.

Ale, on the cob, it is important to turn respect on the rіven statі. Vimirati height of stiyovih boxes to help budіvelny wooden rіven. It is necessary to make a rosette for mounting openings.

Permissible correlation of the line is 3 mm.

Preparing a wooden canvas means installing a lock with a handle and designating a place for part of the loops. Stay better at work when the box is ready and reconcile її in the opening. The wooden box is selected from the designated stitching points. Let's do it - no-intermediate installation:

  • a box of wooden wedges is fixed to the opening;
  • yakshcho walls and overlapping concrete, the diameter of the drill is due to the jointness of the dowels;
  • screws are installed in dowels without tightening;
  • apply loops and encircle them (parts of the loops are rolled out on a 20 cm window at the edge of the end of the wooden canvas);
  • butt, also a place for loops to be covered with varnish;
  • fastening loops to the canvas;
  • the block is inserted into the opening and the hinges are fixed residually, and the screws are tightened.

The technology of installing wooden doors is simple for people who are trying to figure it out. The only folding is physical susilla at the rest of the stage (pіdnyattya virobu and yoga fastening on the grooves at the doors). Ale, after the installation, it is necessary to follow the steps:

  1. seal the gaps between the parts of the system with a sealant;
  2. install platbands, rewire the locks;
  3. plaster the door between the doors with the head part of the construction of the booth in order to make the stench less aesthetically pleasing.


Improvement of the opening is built not only for beauty, but also for the best fixation of wooden doors to the foundation of the house.

Preparation for the opening

Korisnі oradi zі zbirannya that vstanovlennya pochinayutsya from tidying up the old lint and clearing the gaps between the doors and the opening, removing the door leaf. For whom it is necessary to vipile two transverse dirks across the beast down. Let's beat the vertical parts of the old door frame. It is possible to victorious brucht, so as not to draw power. If the upper beam is not neglected by the installation of the viroba, it is known that way.

We choose a box

The wooden box is folded into three or four beams in a profile arranged at the frame. 2 vertical bars are called posts. The height is similar to the door leaf. Short beams can be called the upper jumper and threshold.


Etapi work over a wooden box:

  • the profile bar is adjusted according to the necessary parameters;
  • step on the upper and lower stations are visible;
  • all parts are creaked with screws or behind additional bolts;
  • zvnіshnya and vnutrіshnі side;
  • grooves for loops are visible on the inside.

Incorrect folding of the lower part of the box, like all other її kutіv, may end up splitting the tree when the screws are screwed in, so that you do not drill through the ends of the sprig opening in the front. The diameter of the drill bit of the screwdriver or the drill does not exceed 3 mm. And without a trace, the screws are guilty of screwing around with a twist in all corners.

To complete the process of folding the box, the next step is to reconcile the door leaf. Gap between them and the stіykami are not guilty of revisiting 2 mm.

Hanging canvases on hinges

For installation, it is necessary to know how to open the loops and fasten them. Important is the process of joining the door leaf with the frame. Installation can be of the following types:

  1. waybill;
  2. vrіzna;
  3. cool.

The simplest first option is to fasten the canvas over the door block. For vrіznogo vzglyadu characteristic nayavnіnі zaglyblenі, zavdjaki zljayutsya why from the surface. At the vertovy vikoristovuyut special pins for screwing into a tree.

If it were a kind of sight, it could be two parts, which would fasten either to the box, or to the door leaf. Sob z'єdnati loops, їх dress one on one. Skladnіst can cause the vag of a wooden virob, but the principle is simple.

Filling the gaps with mounting pins

The gaps can appear as between the canvas and the door frame, as well as between the door block itself and the construction of the booth (wall, stele, pidloga). The first ones blow out the pine. Ale, so that the catching pina did not create pits and enlightenment through the vice and falling to the bottom, place a cardboard bag in the crack. Sealant sticks better to wet surfaces, so it should be lightly moistened with water. Close the gaps when the position is closed. Bazhano do not chip the wooden structure 10-12 years old. The excess of the stump is neatly cut with a knife under the line or a spatula.


Installed at the premises

As soon as you know how to install the entrance doors into the booth, then following the same principle, you can block the wooden door block and the utility room. Retail pogaє fіlіgrannostі ozdoblyuvalnyh robіt z installation of technical doors. Do not need insulting sides of the castle - enough is more than good.

The order of installation of rose structures

Rose doors are popular due to their functionality, economy of space and modern privacy. The process of their installation is to lay down according to the type of fastening, which can be:

  • thresholdless - the doors are trimmed on the upper plinth;
  • threshold - mount the system at the sublog;
  • universal - with upper and lower fastenings.


The scheme of work with pink models is practically not considered at the first stage: dismantling of old doors, preparation of the opening, opening of the world at the places, de-creeping the door leaf, installation of the box.

Let's move on to the upper level of the system. For which a wooden canvas is applied, that one is assigned to the upper rib. With self-naring beams, the timber is fixed to the wall - there is space for guide rails. Next, the lower straight rail is fixed slightly on the timber. The freedom to move will be changed and, for the necessary self-tightening, the self-tightening screw will turn stronger.

Then, at the carriage with rollers, bolts are screwed in and wound onto the rail. To fasten on the way.

As the lower fixation is planned, the groove is not less than 18 mm deep. The wooden canvas is fixed with carriages, the gap between the doors and the wall is fixed. Vin is guilty of revisiting 5 mm.

It is practically impossible to carry out the installation on your own. I want to need 2 individuals.

Additional elements when installing another door

Installation of another wooden entrance door is carried out for noise, sound insulation, and heat conservation. It’s best to fit in with cym to help insulate with dermantine or else. The presence of an additional lock and handles, decorated in harmony with the style of peace, promotes arrogance and reinforces the relish of the house.

Installation of entrance metal doors is a labor-intensive process, which depends on the obviousness of the songs. With the help of the method of saving, people act independently. In the article, we will look at the procedure in detail.

We are preparing a tool for installing metal doors. Otzhe, you need this:

  • Perforator (pozhano yakomoga tighter). In yoga, you can speed up with a percussion drill with a pair of nozzles.
  • Vimiryuvalnі priladi - roulette, temple, rіven (ideally laser).
  • Bulgarian with a great stake.
  • A doshka, a saw are necessary for making small pieces.
  • The material for filling the seams is the mounting pin or cement rozchin. The first option is simpler, and the other is more advanced.
  • Kripilnі elements (anchors, rods thinly). Better than their pridbati in a set of doors.
  • Hammer and chisel.
  • The key for twisting the elements of the fastening of the double dimension. Abo screwdriver іz the right nozzle.

Since you don’t have a puncher or a grinder, but you don’t plan to buy such an expensive tool, you can order it. In the rich places of the country there are organizations that give such a service.

Dekіlka sіv pro vymіri

Before us, it is necessary to measure the width and height of the opening. It is necessary not to look like a box, but like a concrete (or concrete) base. You can only go to the store for a little while. There are two options:

  • Lock the door and open the door.
  • Buy a ready-made model with close parameters.

For the first time, the purchase will cost significantly more, but then you won’t be able to use force to expand (sound) the opening. As if it were a new canvas of a new design, then we would choose a model that would ideally fit for the roses. In "Khrushchev" and other typical booths, zbudovanih in the SRSR, as a rule, open non-standard openings. Therefore, the technology of the installation is extended. Tsya operation vimagatime chimalo physical forces.

Before him, like a prayer, you will be appointed, in some way you will curl up. If your apartment is located on a white wall and there is a screen hanging on it (with machine guns and lichniks), then it’s better if the handle is ruffled from the other side. At this time, the canvas will not knock on the box.

We can expand and open the preparation

Proper installation of metal doors starts from fitting the opening. As soon as wine goes for rosemaries, it is necessary to see the surface less. For which vicorist is thick cement rozchin. It is recommended to shave in sprat balls. I throw it on manually or with a spatula sumish, after which I spread it with a spatula.

I’ll open the zbіlshennya tse even more rich and brudny stage robit. To that, tell about the courts, to choose an hour, if you are not at home. We apply a rosette around the perimeter (P-like). Otzhe, there are two options. First - take a grinder with a large (diameter not less than 40 cm) disk on concrete and just take a ball of concrete of the necessary comrade. At such a time, there will be a lot of good wit.

Another, more sparing option:

  • We take a perforator with a drill bit of a larger diameter of the lower part of the wall.
  • Open at the wall with a slit open along the entire perimeter with a minimum crock.
  • For the extra help of a hammer, that chisel would look like a surplus of concrete.

Important! It is necessary to fill the technological gap of a few centimeters, so that it is possible to correct the position. Shchilinki will be mortgaged at any time.

This technique will take more than an hour, then you will bring less discomfort to your muscles. Naprikintsі robimo virіvnyuvannya surfaces.

The main front is robit

Skіlki koshtuє installation vhіdnih metal doors, hvilyuє bagatioh. Such a service will cost at least 4 thousand rubles (deposit due to expansion and folding). Therefore, it is an independent rational option for this robot, especially if you go for an inexpensive model, since installation in such a way can be more expensive than the purchase itself.

Porada: if the bag of new construction is small, and if you have the strength to work with it, then you can not take the canvas out of the box.

Otzhe, it is necessary to do this:

  • We are going to have to reconsider the exploitation of the canvas. We insert the construction at the opening.
  • Pereviryaemo for help equal that verticality and verticality of the scales. It is necessary to achieve ideal accuracy - peroxide induces a millimeter in the sprat to disrupt operation. As if the unevenness of the surface appeared, it is necessary to put them down.
  • Having reached the ideal fixation, the box needs to be sealed. For this purpose, wooden tufts are inserted into the prom (minimum 4 pieces for the skin side).
  • Zrobivshi tse, once again reverifying the equanimity of the situation.
  • Now we are fixing for the help of the supporting elements. For budget models, anchors may be included in the kit, they will need to be supplied. Bazhano is happy to be a sales assistant when buying.
  • The smut rule is that on the skin bots, there should be no less than three points of fixation. Only in such a situation will be guaranteed to be correctly installed.
  • The back is fastened with that bik, de-stashed loops. Open the mounting box on the box - through them we work to drill and install the anchors. As if in front of the stench of the day, they happen to be drilled in front with a drill and a drill for metal. Robimo 3 for the skin side with an approximately equal coat.
  • Having screwed open, we insert bolts and tightly tighten the nuts. This procedure is carried out by all parties.
  • We insert a canvas (as they knew mi yoga). The smoothness of the move is reverified: the doors are not guilty, mimingly moving. We install it at different positions. One of them is not guilty of walking. As such moments are guarded, it is necessary to fasten the reinforcement.
  • To adjust the position loosen (tighten) the nuts. It is impossible to give due respect to this aspect - it is impossible to regulate it further.

Final stages of work

On this, the installation of metal entrance doors with your own hands is practically completed. Now it is necessary to lay the stick as soon as it appears. The mounting pin is the simplest, but not the least option. Until then, it will be easier for the work of burglars to win. To this we recommend victorious cement rozchin, in some way add alabaster.

The work is simple:

  • Curve the stick from the side of the apartment, whether it be some equal handy material (plastic panel, thin board). Tse zabіgaє vpadannyu sumishі in the corridor.
  • Having equipped ourselves with humovy mittens, we throw a gap at the opening from the side of the mouth. I need to re-remember її.
  • For the help of a spatula, or a trowel, it is possible to expand.
  • We go into the apartment and pick it up.
  • Robimo putty from the other side.

Cement sum hanging dry (one or two). Therefore, at this hour, try to speed up the operation of the doors, as far as possible, in order to avoid the cracking of the rozchin. Do not forget to check the locks and handles of the robot - the stench is to blame smoothly. For the smallest defects, have them replaced. It is recommended that you oil all the loose elements (keys, hinges, thinly) in the morning. For whom is the miracle of WD-40.

The installation of metal doors will make you feel quiet, whoever puts his mind on it first. But without this stage, the repair or the completion of life is impossible, so we virishili for help and took the right professionalism from this statute.

Trochs about entrance doors

Without a doubt, the most conservative detail of the interior of any apartment is the entrance doors, which more and more people are trying to build with their own hands. Just as popular as metal models, so are wooden ones. Having passed the evolutionary path through the shkiri, which blocked the entrance to the cave, to a modern armored diva with cunning locks, it was essentially abandoned by it, for which it was assigned - its own cordon, which marks the boundary between the Volodinnya. The installation of entrance doors today, the creation of a bar at the entrance to the premises, following the goal and the cold.

As a rule, the stench is rozstіbnі. This kind of pod_lyayu sche on the "right" and "leva", fallow, in addition, the loops were loosened. The main shortfall in the installation of swing-type entrance doors is the need for space for dining. Through tse at the planning, whether there is any kind of accommodation, such a view is transferred, it is necessary to obov'yazkovo to make the necessary changes. On the right, not only in the radius of її vіdkrivannya (on the plans of the wines, it is indicated in a special way), it is necessary to protect those who happen to have enough space for the passage of people, and even in it you can buty a large object.

Main materials for entrance doors

Most often, when installing metal entrance doors, they are zipped to comply with the standard assigned to the model with the SL-2000 index. The basis for it is two sheets of alloyed steel with a thickness of 1.5 mm and welded together at 200 points with horse-like ribs. The lock is guilty of buty cylindrical shape and mother up to 9 steel crossbars (made of hardened alloy), like a constipation for an hour to enter at the wall and the bottom of the mustard side of the canvas. If there are brothers in front of the installation of metal doors, then the tovshchina becomes no less than 50 mm.

Vidkrittya and zakrittya of such a virobu be carried out easily and noiselessly. The design is simple, you don't see any of the middle doors, you don't care. If you need to install the entrance doors with your own hands, then you should know that the head rail (without a box) has 50 kg. Obov'yazkova umova bezpeki - pridbannya dodatkovoї butt zasuvka and telescopic vіchka with a great look around. If it is important to follow the installation of metal doors according to all the rules and the use of special materials, then they will have soundproofing.

Rosemaries are not set strictly, they can be worked differently depending on the needs of the client. At zovnіshnіy and vnutrіshnіy obrobtsі zastosovuetsya both natural and piece materials. Even more solid looking apartment after the installation of metal entrance doors from wooden buildings. As an additional safety entry, it is possible to complete a special part (“insert”), as a way to increase the height and weight of the structure.

On the steps below, behind the installed metal doors, there are models, in the construction of which there are aluminum and PVC profiles. Not varto is put with znevagou to similar constructions. So, the stench is a little weaker for steel, ale and vartist for the canvas itself and its installation is richly lower. As a rule, such products are supplied by Chinese enterprises. The doors are chosen in a predictable way, and this is the guarantee that they will be rebuilt on the right level. Don’t varto also forget what you law. Tse means that the official store, having taken the Chinese doors for sale, may be accepted in our country, fully accepted.

It's not surprising, but the industry does not forget about the release of wooden entrance doors. The stench did not become a great popularity, but with the rise of drink on the floor, with the advancement of security, the vimogi changed before them. Stronger constructions have now become obov'yazkovoy and non-mandatory mind, the installation of wooden doors with hermetic seals and gaskets, the presence of the threshold.

We see the old box

Do-it-yourself installation of entrance doors gives impersonal opportunities to pardon, so that we can get rid of peroxide, otherwise it will break down. But you don’t want to hurry up to help fakhivtsiv, because more and more negative comments are being sent to the address of installers to build reputable firms. Yakscho special certificate in such a sphere there is no sound, then for the installation of steel (steel) doors, it’s better not to take it with your own hands yet. If you have ever tried to work on a wooden model, you can try it.

At the same time, it is necessary to dismantle the entrance doors; Nasampred vіdokremte canvas vіd boxes. More shortly, zvichayno, zrobiti at the same time z kimos, so that vaga її may appear incomprehensible, and taking off the loops may be traumatic occupations.

Then we will remove the anchors and flowers from the doorframe, which will hold them in the open. At the sidewalls, they drank at a few places. It will be easier to see the elements in parts. Then, from the opening, you can clean up the upper and lower parts. Folding can be folded at the top, as if you had a metal box. Here you can not do without a grinder. If the door opening looks like the old construction, it is also necessary to clean it from the sound and heat-insulating materials and tap the edges of the perimeter with a hammer, so that the excesses and plasters are not covered in the distance during installation. Now let's move on to the installation of metal entrance doors.

Mastering the installation on the most stock stock

So, it is simply necessary to install the entrance doors correctly, otherwise it’s necessary to turn back after the method described above, so that the construction is not good, then we can look at it as a work.

How to install metal entrance doors with your own hands - pokrokov's scheme

Krok 1: Opening the door

The installation can be made more complicated, since the perimeter outside the spacers does not match with the new door frame. Why is it necessary to remember the Chinese goods, often such a problem is check on you at the budinka-stalіnkah. If a new door frame is wider, or more for a hole, you can see the additional space of the walls, or carry out the burial in that place, where you know the threshold.

Do not forget about the technological gaps between the wall and the door frame, in order to zoom in on the adjustment when installed.

Buvaє, scho design of doors in width or height less than the opening. Tse mozhe statisya when buying an imported sample for guessing already an unkind word of typical budives. It is necessary to carry out the work of fitting in the fallow area of ​​the retail opening (gap). Yakshto vin is small, literally a sprat of millimeters, it’s enough just to beat the door openings. In times of significance, it will be necessary to work masonry from silicate chain or wall stone. Do not fill up the link with the main wall, so that you don’t waste your virtue.

Krok 2: Unpacking

Now let's move on to how to install a metal door model with your own hands. We know that the packaging is good and that it is succulent. If the doors are covered with polyethylene slicker, do not hurry up, even if during installation it is possible to act inaccurately, then we will not take it for granted. At a set of fastenings, whether there are any door frames, the obov'yazkovo includes anchor bolts. Even if such a raptom did not appear, you can buy them. Dovzhina stink can be buti 10 to 15 cm, and diameter - 12-15 mm.

Krok 3: Mounting the box

At once, install the box from the helper, turn it over to verticality and horizontality for additional equals or shields. Place wooden wedges and start drilling at the wall by opening the anchor bolts. For an hour of work, try not to destroy the door frame. Sverdlіnnya is recommended to start from that side there will be loops. After that, insert the bolts and carry out the fixing of the frames, periodically carrying out a re-verification along the vertical and horizontal.

warming robots. After the installation is completed, remove the polyethylene, as if screwing up the door leaf, and proceed to the installation of decorative details. Dvі dobi bazhano not koristuvatisya the door, but robit tse m'yako і yakomog more.

Yak montuvati correctly

As a rule, the entrance doors can be put by the facsimiles of firms, in which the smells were sealed, and few people work independently. In any case, the guarantee will be canceled automatically. But to know how to correctly install the structure, it is necessary that the mother be able to control the work of the installers. Itself about tse y timetsya at tsіy stattі.

In order to secure your life from the evil one, it is necessary to make the entrance to the new one as safe as possible. So far, nothing has been invented, the most beautiful, the lowest metal ones, as if for an hour they are supplied with a lot of locks, systems of guarding and signalization.

The stench is made from a similar material, which is even more important to deform. But all tsі come in, you can use them, so you don’t have to follow the installation rules. Even the evil-doers can't even open the door themselves, but simply fight through the opening. If nothing happened, follow it closely, as the installation is being carried out.

Why is the property of metal doors:

  • The main thing is the safety of the pair with other materials. Crimean material, safety of the meshkants, to bury the overhead castles and to protect others.
  • Availability of any kind of supporting materials.
  • Standard choice to milk wide, that satisfy different categories of buyers.
  • Trival term of life.
  • Vіdminnі indicators of sound and thermal insulation(Div.).

The first step is to install the installation of metal doors, to get familiar with the knowledge. It is possible that some of them have already installed the door and show you a good seller of a picker. Ask the seller to show you the documents showing the characteristics of the doors.

Obov'yazkovo look back at the possibility of a purchase for the presence of such moments:

  • Doors due to mother tovshchina metal not less than 2mm.
  • The doors in the closed state are due to the mother with insignificant gaps, closed narrowly, from the side of the hinges. If there are gaps in the day, then the future will not have problems from curling up.
  • The lock can be equipped with flashing pins on four sides of the leaf. Such an attachment will not let you see the hinges and open the doors.
  • Find out about the anti-corrosion ability of the virus.

Important! Well, inexpensive models are equipped with plastic pins, not with pins. Tse is unacceptable!

What tools do you need

Dismantling and installation of metal doors requires a set of tools:

  • small crowbar crowbar;
  • perforator;
  • Bulgarian;
  • rіven;
  • temple;
  • hammer;
  • roulette;
  • wooden wedges;
  • fastening anchors;
  • mounting pin.

Let's get rid of the old design

The main preparatory stage during the installation with wet hands of the entrance door is the removal of the old one. We dismantle the old doors.

Dismantling of the entrance doors can be mentally advanced at the next stage:

  • First, you need to work - ce vіdokremiti old vhіdnі doors vіd boxes. As if the old construction was creaking behind the additional hinges, you should open the door clearly at 90 degrees. If you want to fix it with a crowbar, lift the old doors uphill, work hard until your design jumps out of the hinges. How to twist it on non-removable loops (div.), just twist it with a great twist.
  • Repair the dismantling of the base. In order to dismantle the box, pull out all the colors and anchors from it. After that, cut it in the middle of the bar of bichnі stіyki. Rozpilyanі stiyki dismantled with a crowbar.
  • In addition, as you have seen the above-described diї, you do not care about the upper and lower parts of the door. It is more important for these people to have a door frame made of metal. Possibly, in order to dismantle such a box, you happen to wiggle її for the help of an angle grinder.

In addition, as you dismantle the old entrance doors, take care of the plaster, which is worth it, and shmatkiv rozchiny. Tse it is possible to work for the help of a great hammer. Do not forget to carefully remove the old flowers and the excesses of sound and heat insulation (div.).

Preparation for the opening

As if there were old doors in the open, they should be carefully dismantled. You can do it yourself, without checking the installers.

Father:

  1. How to hang on random loops, just open it її Substrate the lower end of the bruht, or else it is important to lift the door leaf, so that it jumps out of the hinges.

If the hinges are not broken, then unscrew the screws, like trim the doors in the box, for the help of a screwdriver or a simple screw.

  1. When empty, the box will be easy to dismantle, as if there is wood. For whom to twist all visible fastenings from it - anchors or screws, bend flowers. If the box is worth standing at the opening, then cut it in the middle of the side bars and cut them out for an additional bruht. After that, the upper and lower parts of the strapping can be dismantled without problems.
  2. For dismantling the metal box, fixed in the opening for help, you may need a grinder. All fittings are fastened with it, as if it is impossible to pull it by hand.
  1. Having dismantled the old one, clean the opening in the mounting pin, warmth and sound insulation and everything that can make a new one installed.

Front view

In front of him, as the entrance door, install a robimo rosette. For the transparency of the coristuvachs, the height of the doors is to become two meters, and the width is 90 cm (div.). Vidpovidno, otvir is guilty of buti trohi greater and wider, for arranging the elements of the box and gaps.

As zero, the constructional sublogs are accepted plus:

  • thermal insulation - about ten cm;
  • screed - close to five cm;
  • ozdoblyuvalny ball pіdlogi - two or three cm;
  • the upper beam of the door frame - five or six divs.

As a result, adding all the values ​​will require a height, for which there will be a jumper (approximately 2.24 meters). Rather take it from the reserve for a couple of divs.

Ways of fixing the door frame

The metal box can be secured at the door in different ways:

  • Through open the profile box
  • 3 different mounting plates

Fastening through open the profile of the box

The installation rules allow the box to be fastened in the first way only in that case, as the opening is larger for 15 centimeters. Otherwise, it is easy to virvati zі stіni at once from the box. In addition, the entrance doors, when the boxes are fixed, through the gaps in the installation opening, it is possible to drown in the middle of the opening.

On the right, in order to install the box flush with the outer wall, then the installation opening will appear on the surface of a total of 4-5 cm from the surface, and the fixing will be even more inappropriate. And if the wall is a monolithic concrete panel, then the risk, when drilled for fastening, stumbles upon metal reinforcement, as if it is spread out at approximately the same depth.

Ringing open the doors with vanes, and in the kit with the entrance doors there are special long-term anchor bolts for fastening and decorative plugs at the color of the box.

As there are not many such openings, they need to be welded on a wall of approximately 30 cm. Yearly, pieces of reinforcement are hammered through them, or steel bars with a length of at least 15 cm and a thickness of 12-15 mm, which are welded to the profile from the inside.

For proof. For some reason, the jamming of the zvaryuvannya is impossible, the metal rods after the box is installed can be riveted with blows from a sledgehammer or an important hammer. In case of need, be careful not to damage the box.

With this method of fastening from the skin side of the rack, the boxes will be covered with technological gaps with a width of 10-15 mm.

Fastening to different mounting plates

Another way of fixing is more expanded and extended. If you know how to install the structure correctly, then close the doors, the box of which is equipped with mounting plates with ready-made fastening openings.

On the skin surface, they can be no less than three. These plates allow you to install doors in the same plane as the outer wall, so that the stench of the inside of the apartment is fixed to the opening on a sufficient window on the surface.

Such boxes are fastened to the walls in exactly the same way, as in the first fall - with anchor bolts or steel rods with offensive zvaryuvannya. Ale, the expansion of technological spaces is increased up to 15-20 mm.

Porada. To ensure more secure fastening, it is possible to combine offensive methods, vicorist and mounting plates and open them in the box.

Installation of entrance doors

Yak i u vipadku z interroom doors(div.), a box is mounted in the opening.

Zrozumіlo, the correct installation of the entrance doors is the transfer of the slats vertically and horizontally, so the box needs to be fixed in the opening behind the help of the wooden wedges, so that the mother can adjust the position.

Come on like this:

  1. Nasampered virіvnyuєtsya at two flats stіyka іz door hinges for which the victory is won for a long time, or for the temple.
  1. If it is crushed, at the opening through the installation opening, they will be drilled perforator channels on the depth of dozhini anchor_v or shtir_v.
  2. After repeated re-checking, the hinge post of the box is fastened to the wall described in more ways: screwing in anchors or hammering in metal pins.
  3. The advancing krok is the hanging of the canvas on the front-seated loops. All fittings can already be installed on the door. , vіchko.
  4. Proper installation of the entrance doors requires the alignment of the other rack of the box. In order to grow, cover the doors and, moving the rack, reach, so that the space between them will be equal in size to the whole length and become 2-3 mm. If so, you can close it in the open and remove the rack, having changed, so that the door can easily enter the box, and the lock can be pulled in without zasil.
  5. After the installation of the doors is completed, it is necessary to cover the gaps with a cement rosette or fill the gaps with mounting foam., pasting the box in front with a paint line, so as not to wander yoga.
  6. If pina or rozchin is left to dry, you can proceed to the plastering of the mowing or their facing with decorative building materials.
  7. On the outer side of the entrance doors are decorated with platbands.

European way of fastening doors

If you seriously put food, if you correctly install the doors of the entrance, then give respect to such titles as the European way of securing. For the new one, special boxes of a special profile are made, which open the opening from both sides. Їx to shy away from zamovlennya looking at the width of the door opening.

A large space, which is established between the box and the wall, is filled with cement rosemary, to the warehouse of which special polymeric additives are introduced to promote minerality. After this hardening of the wall with the box, they establish a monolithic construction, which is practically not subject to rubble.


Let's get down to virivnyuvannya

How to put the door to the apartment: you can see the excess of the pin.

It is subdivided into the following stages:

  • flip the verticality of the stand;
  • drill with a perforator at the wall through a special mounting bush, open small, The diameter of those faults is 15 mm, and the depth is 100-120;
  • score in the open shtiri that zrobіt zakrіplennya anchor boltіv;
  • revert the verticality of the stand, vikoristovuyuchi budіvelny rіven;

Now you can hang the doors. For whom to make the back of the loop. Do-it-yourself entrance doors are practically installed.

After all the procedures described above, install the door fittings (div.). Now try to turn the bіchnu stіyka in such a rank, so that the gap between it and the doors does not exceed 2-4 mm in all heights. After that, close the stack and repeat the operation with another. Once everything is done correctly, you can proceed to brewing the lozenges or tightening them.

Now hurry up with the mounting pin to close the gap between the door frame and the wall. In order not to confuse the canvas and the box, glue it with molar tape. As a rule, for door trimming, one cylinder is used with mounting pins, but you can also play it safe.

Approximately through the doba, the assembly line is dry. Cut carefully with a knife the excess of the stump. For this reason, to make space between doors and door frames with natural plaster or other suitable material. The installation of the entrance doors is completed.

Vitaemo now you know how to install the entrance doors. Above all, remember that when installing the entrance doors, it is necessary to pay attention to respect and neatness. If you know everything exactly as it is indicated in our instructions, you can install the entrance doors yourself just as well. After installation, you can choose the only thing that will fit your interior, just experiment with fittings, otherwise fill in everything in the basic configuration.