☰

Cultivator krit keruvannya carburetor. Cultivator Mole: looking at models and prices. Periodicity and nature of work from the technical maintenance of the motocultivator Mole

Vedennya selyanskogo gospodarstva zavzhdy pov'yazanі z vikoristannyam znaryad pratsі. Vrahovyuchi, scho vyroshchuvannya I give birth, tse folding and rich-stage processes, the skin farmer is guilty of but a significant arsenal.

Even though the large fields are cultivated with tractors, supplemented by various types of overhead landscaping, summer residents of the turmoil make do with entrenching tools: shovels, rakes and motors. Aje vikoristannya tractor on small plots of land є economically invisible.

However, it is not good for motoblocks to cope with these tasks. The outbuildings are equipped with dekilkom with various types of supplementary possession, which allows you to yell, cultivate and mulch the land.

In addition, for the help of a walk-behind tractor, you can mow grass and carry it on a small crop. In the middle of the category of special equipment, the mole cultivator is seen. The topic of the article will be technical features and possible malfunctions of the cultivator model.

General information

Motor-cultivator "Krot" is the best representative of the Radian craft. The first modifications were made in serial production in the 80s of the last century. Virobnichi lines were bought from Moscow and Omsk.

The farm equipment was repeatedly modernized, and with the improvement of success, it was possible to maintain a homestead state and to cultivate small plots of land. Regardless of the forty years of history on Mayzha, "Mole" is often heard on the territory of Russia and the post-traditional expanse.

The design of the unit includes a steel frame, gearbox, power plant and control handles. On the factory models, petrol engines with an exhaustion of about 6.5 liters are installed. with.

Catch the respect that on the garden plots it is possible to use the Krot motor cultivator with the Lifan engine. The replacement of the power plant is carried out by farmers independently, with which it is necessary to add pulleys to the engine.

For the help of the cultivator "Mole" you can vikonat the new cycle of work on the garden plot. Zokrema, milling the soil to a depth of up to 25 centimeters, fluffing and mixing the earth with growing trellises of weeds, weeding the inter-row.

Respectfully, in the event of a breakdown, there are enough spare parts for the "Mole" in the warehouse of special difficulties.

The technical characteristics of the cultivator can be seen from the butt of the Mole model MK 1A 02

For all models, the transfer of additional attachments, yak_ increase the st_yk_st of the cultivator and the zcheplennya with the shaved surface. In addition, zastosovuyutsya znіmnі wheels, scho will facilitate the transportation and saving of the cultivator.

In the basic configuration, cultivators "Krot" go from the ground cutter. For the pre-planting preparation of the summer cottage, the entire overhang will be enough.

At the time of consumption, you can add additional elements:

  1. Okuchnik for watching sheep crops.
  2. Mower for harvesting grass on the farm.
  3. Pump - ensures the supply of water for irrigation and dobriva roslin.
  4. Vіzok appointments for the transportation of small-sized vantazhіv on the territory of the business.

Possible inaccuracies

Like and be-yak іnsha tekhnіka radyanskogo zrazka, "Krot" dostit nadіyny in operation, and nevibagly shdo technical service.

For the advice of farmers, the cultivator can be used for 12-15 seasons, without putting it on a major overhaul. However, breakdowns are inevitable, but you can fix them on your own, without going to the help of specialists.

Respect that the unit does not miss folding knots. In addition, in the basic configuration, there is an instruction manual for the motor-cultivator, de descriptions of the problems, which are most often explained, and recommendations before their adoption.

Let's take a look, how to independently fix the inaccuracies that they blame.

  • Chi does not start the engine. Possibly, the problem is with the wrong fire. To solve the problem, it is necessary to take a look at the zaplyuvannya candle. If it is dry, then the working cylinder does not fit a heavy bag. Like a candle, it is recommended to dry the cylinder or pump the engine with a starter.
  • Every day is a spark. In this situation, it is necessary to replace the spark plug or adjust the gap between the electrodes. Recommended settings: 0.8 mm. Do not forget to check the station of the electrical wiring and the station of the inspected filter.
  • The engine is running unstable. Necessary adjustment of the carburetor, I will re-check or replace the hot water filter.

Catch the respect that more problems are caused by mismanagement of the rules of operation. To avoid malfunctions, before the cob of the robotic cultivator can go through a run-in.

It is necessary for rubbing the rough elements of the gearbox and the engine. Not dotrimannya tsikh could bring to mechanical failures of the power plant with an offensive replacement of the engine.

Radiate respect for the term of warranty service. As soon as an hour for a warranty repair was installed by a virobnik, not having passed, it was not possible to work independently for the repair of possession. Such vtruchannya at the design to cause automatic repair at the warranty repair.

Okremo varto guess about the conservation of the cultivator. Most of the farmers do not beat the technique in the winter period, so it is necessary to competently prepare the possession to a thriving harvest.

  1. Before saving, I should anger the excesses of the fire. For which engine, run until the carburetor is empty.
  2. Then we coat all the details that rub with oil, and place the cultivator in a dry place. Before the beginning of the season, the technique should be tested with small efforts, to re-oil the knots and elements.
  3. During the period of operation, it is necessary to periodically lubricate the cultivator, check the tension of the drive belts and re-tighten the threads.

tell your friends

In contact with

Vlasniks of dacha villages, towns, as well as residents of rural areas sing-songly appreciatively appraised such an agrotechnique, twisted by the hour and all kinds of innovations, like a motor-cultivator “Krot”.

Who is a yogo virobnik? This technique appeared in the world in the distant 80s at the Radyansk Union at the aviation plant of AT “MMP im. V.V. Chernishova". The harvester of the cultivator "Krot" gave us, who is engaged in the state government for special needs, a right mini-harvester.

Motor cultivator Krot can be practical as agrotechnical robot:

  • oranka ґruntіv, including cylinnyh;
  • planting potatoes;
  • roslin's throat;
  • weeping;
  • picking I plant potatoes;
  • tidy up the snow at the winter hour;
  • grass scythe;
  • the transportation of the chosen one is born from one point of recognition to the next.

Modifications

Hour ide, technical progress led us ahead of time, and the axis has already been created new progressive (improved) models, as if to quiet their masters with more expanded functions.

Would you like to know everything about the "Krot" motor cultivator - its modifications, technical characteristics, features of the models, as well as how many different types of cultivator? Vіdpovіdі іn і і power supply, аlso look аlѕо vіdeo іt іdgukі spozhivacha podpomozhut you іznachit іz model cultivator "Mole".



Models of the mole cultivator:

  • MK-1A
  • MK 3-A-3
  • MK-4-03
  • MK-5-01
  • MK 9-01/02
  • KROT-R

Leather from the designation of models of a motorized cultivator also may have a sprinkling of different, improved modifications.

Let's take a look at the main characteristics and features of the skin representation of aggregates.

MK-1A

Significantly, it is a compact unit, equipped with a small two-stroke carburetor engine (2.6 hp), which, at the same time, could make a decent piece of land. Zavdyaki to their dimensions of requests for robots in greenhouses.

The cultivator of this model cannot reverse and the building collapses forward on the same speed, but does not change its majestic functionality (capabilities). A small haul to the unit (48 kg) allows you to easily transport it to the required direct route.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Cutter diameter 33 div.
Tension 2.6 HP
Number of swedes 1 forward/0 to that
Reverse Hi
steering column 1 camp
Grip width 35-60 div.
Glybina zakhoplennya 25 div.
vaga 48 kg.
Dimensions 1300x810x1060 mm.

MK 3-A-3

This unit is three times larger than the front one, and that car is no longer 48, but 51 kg. However, yoga can still be transported in the trunk of your car or on a dahu. The high productivity of the cultivator "Krot" MK 3-A-3 is conditioned by the greater exhaustion of the engine of the GeoTeck brand, it becomes 3.5 liters. with.

The main brand rice MK 3-A-3 type MK-1A is a reverse function. At the same time, the performance characteristics of the cultivator improved, and the work with the machine became richer.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Dvigun brand GeoTeck
Dvigun brand GeoTeck
Tension 3.5 HP
Number of swedes 1 forward / 1 back
Reverse Є
Grip width 35-60 div.
Glybina zakhoplennya 25 div.

MK-4-03

Tse agrotechnіchne obladnannya maє 53 kg of vagi and Briggs & Stratton brand engine for 4.0 liters. with. Reverse function and one speed forward and back. In this motor cultivator, the depth and the width of the grip increased, which allowed him to win agrotechnical work more productively and more productively.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Dvigun brand Briggs & Stratton
Dvigun brand Briggs & Stratton
Tension 4.0 HP
Zcheplennya Reminne
Reducer lanceugic
Number of swedes 1 forward / 1 back
Reverse Є
steering column 1 camp
Grip width 35-90 div.
Glybina zakhoplennya 30 div.
vaga 53 kg.
Dimensions 1300x810x1060 mm.

MK-5-01

Given the model for its technical characteristics, it is rich in what is similar to the front model, the same belt is coupled with a lancing gear, shaft, engine productivity, width and depth of grip. However, in the basis of the attachments, there is another type of engine (Honda), which depends on vitrivality and tightness (4.0 hp).

Compact dimensions and a 53 kg wagon allow you to transport the cultivator to the selected object without any problems.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Dvigun GC135
Dvigun brand Honda
Dvigun GC135
Dvigun brand Honda
Tension 4.0 HP
Zcheplennya Reminne
Reducer lanceugic
Number of swedes 1 forward / 1 back
Reverse Є
steering column 1 camp
Grip width 35-90 div.
Glybina zakhoplennya 30 div.
vaga 53 kg.
Dimensions 1300x810x1060 mm.

MK 9-01/02

Handy, functional unit from the exhaustion of the engine (HAMMERMANN brand) 5.5 liters. with. This motor cultivator is building without special zusil to build the whole earth. Mineral cutters and even more nachipne (prichіpne) possession made this cultivator an indispensable helper in the home garden, a small farming state, in the city and near the greenhouse. The dimensions and weight of the unit do not create problems for transportation.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Dvigun brand HAMMERMANN
Cutter diameter 33 div.
Dvigun brand HAMMERMANN
Tension 5.5 HP
Zcheplennya Reminne
Reducer lanceugic
Number of swedes 1 forward / 1 back
Reverse Є
steering column 1 camp
Grip width 35-60 div.
Glybina zakhoplennya 25 div.
vaga 53 kg.
Dimensions 1300x810x1060 mm.

KROT-R

This agrotechnical application is used for the automatic processing of all types of soil, planting and picking potatoes, keeping an eye on the weeds (weeding, subglottis), as well as for grass cuttings, water pumping, picking snow thinly.

At the same time with a motor cultivator, the set has free cutters with a diameter of 33 cm, otherwise you can use them (hillers, a mower, a potato planter, and a digger can be added okremo). A lot of smart people independently prepare such reasons for the motor cultivator "Krot", like a snow picker and others.

Technical characteristics

Parameter Value
Virobnik JSC "MMP im. V.V. Chernishov"
Krajina virobnik Russia
Dvigun EY-15D
Dvigun brand Subaru
Dvigun EY-15D
Dvigun brand Subaru
Tension 3.5 HP
Zcheplennya Reminne
Reducer lanceugic
Number of swedes 1 forward / 1 back
Reverse Є
steering column 1 camp
Grip width 60-90 div.
Glybina zakhoplennya 25 div.
vaga 52 kg.
Dimensions 1300 x 810 x 1060 mm.

The function of the reverse is handy (on the first models) it just increases the efficiency of the work with the cultivator. The pressure of the Subaru brand engine is 3.5 liters. with.

Instructions for use

Oranca to the ground

The main recognition of any of the representations of the "Krot" motor cultivators is the orange of the soil. For tsієї meti can vikoristovuvatisya milling cutters, with a diameter of 33 cm, or a hanging reversible plow, which can be attached to the cultivator at the back for additional special zchipki. In the first place, the orange is blown into cutters, which collapse, as if they are pushing on the gearbox shaft.

Okunchik T

Subglottis

If it is necessary for the beds to grow up, it is necessary to zastosovuetsya special pristosuvannya - the throat. At the same time, the cutters are lifted, and on their place, wheels with metal grommets are installed. To the back of the "Mole" is attached a hiller (we know the coulter).

weeder

Weeding

In the fight against the weeds, special attachments will be added - weeders, like a substitute for winter knives on the cutters. If you attach a coulter to the rear part of the motor cultivator, then the weeding cream will vibrate the foothill.

Kartoplekopalka KRT-1

Planting potatoes

Planting potatoes and a further harvest is a laborious occupation for those city dwellers who did not get the Mole cultivator, be it a model. The unit itself needs a special reason for its possession - a potato planter and a potato planter. Having tried it once and for a while in a robot, you will forever forget about the bіl at the back and the name of the next hour of planting and picking potatoes.

Kosarka is hanging

Pokis

Skis galyavin, lawns and pastors for the help of the same unit will be used for the help of mowers fixed in the front part of the unit. All that is needed is to fasten the pneumatic wheels on the gearbox shaft, put on the belts on the pulleys of the mower and the motor cultivator.

Pumping unit

Pumping of rіdini

A mobile pumping station is used to pump over the soil, which is also attached to the cultivator. The wedge-bearing gears of the unit are driven by the "Mole" engine, with which it is not forgotten to remove the wedge-bearing gear from the gearbox.

Transportation of vantage

Special carriages, which are fastened to the walk-behind tractor, will help to transport the harvested crop (pieces of vanage, sipuch and other) to the harvesting point. Special fasteners (turning mechanism) will not allow the trailer to tip over. The maximum weight of the trailer is 200 kg.

Technical service

Properly organized and carried out technical maintenance of the cultivator building for a long time to continue his life and practice. Basic operations to turn the unit to normal operation:

  • mittya and cleaning of the cultivator;
  • re-verification and technical inspection;
  • oil;
  • regulation.

Important! All tsі dії need to be victorious regularly, once after victorious “Crete”. Todi yogo terminology of service is to accurately rewrite the statement of 40 years.

The remaining models of "Mole" are equipped with imported two chotirataktny engines. You can see the following brands:

  • GeoTeck
  • HAMMERMANN
  • Hohda
  • Subaru
  • Briggs & Stratton.

Follow the simple service rules:

  • it is necessary to mix gasoline (A-76, A-96) at a ratio of 20/1 with auto-cold (motor oil M-8V);
  • quest for a kіlkіstyu olії and vchasno її add;
  • oil M-8V (avtol) can be replaced by other brands, for example, 10W-30 or SAE 30.
  • after carrying out the work for the cultivator's fate, it is necessary to clean it well and grease the oil and oil of the yogo part, anger the excess of the fire and tidy up the unit.

Vibrating a little M-8B, remember that it is possible to treat with pure olive oil at temperatures up to 27 degrees, more - it is not recommended through overheating. Other recommended options are not vicorous, because the temperature is lower than 4 degrees;

Mole - this is the name of a series of walk-behind tractors in the same-name venerable company, dating back to the 1980s. The company started its activities by launching compact and light models for a wide range of applications. The first version of the same-name walk-behind tractor did not come close, and the foreman rozpochav yogo modernization. On this day, the Mole walk-behind tractor is adapted to modern standards, although in the same basis, as before, the design has been revised by the hour. Large-scale renovations went to the greed, and the hairdressers became less stingy for shortfalls, tied up, for example, from a lack of productivity.

The mole is an old-timer of the venison market among universal cultivators. Vіn is also compact, and looking out of the blue at the aphids of the loud and powerful technology. Ale, not marveling at small roses, Mole building a great range of plants, tied with weeding, weeding, harrowing, weeding, weeding, and so on. The feasibility of the technique can be expanded for the size of the hanging outbuildings. It is commendable that the opener and cutter are already included in the basic version. Obviously, for a surcharge, the harvester has transferred more functional possession, with which the walk-behind tractor can be harvested for harvesting that garden of root crops. Newly equipped versions can boast six cutters. Skin modification may be possible to improve the furrowing of the fallow, depending on what kind of vicorous the coulter is. At the front part of the walk-behind tractor there is an attachment for the installation of MNU-2 for pumping water.

The mole is not built to work offline, so that I can do it manually. Moreover, the operator needs to constantly adjust the kermo, so that the walk-behind tractor does not go uphill or get stuck in the field. Polypshiti prokhіdnіst is possible for the rahunok regulation of the depth for the help of the handle. For this technique, it is necessary to lift it up, or else it is good to squeeze it into the soil for short durability.

  • visible operational parameters
  • high productivity, do not be surprised by the compact body and low-power engine
  • Lance reducer, which is a high level of superiority.
  • with a walk-behind tractor it is easy to maneuver by the rahunka of a compact design
  • shifted horizontally and vertically

Zvernemo respect that the Mole may have a sprinkling of modifications. So, the rest of them are technically well-done, and can be victorious for the cultivation of important soil and wind the line.

Varto indicates that there are two models on the market - Mole 1 and Mole 2. It is logical that the other option is fully functional and more functional. The walk-behind tractor has taken off the reverse gear, which allows it to turn 360 degrees. Also, for the special respect of meritorious updates, a carburetor, a central regulator (it wraps the crankshaft), as well as a more productive filter.

For picking up a walk-behind tractor, it’s not a big deal, so that the car can be moved de arguably - rich in why it’s hot for compact roses. For example, the device can easily fit in the trunk. Ergonomics of the area of ​​water does not make any claims - everything is fitted with its own ergonomic design and rational distribution of key components.

Navisne possession

  • Sivalka
  • Kosarka
  • Kartoplevikopuvach
  • Kartoplekopuvach
  • Ground zachіp
  • Freezi (6 pcs)
  • water pump

Characteristics and dvigun

The Mole motoblock is designed for cutting depth up to 250 mm, and the maximum cutting width is 600 mm. Under an hour of milling, productivity is available to become 200 sq. m. per year. I will attach the mass - a total of 68 kg, which allows me to report to the technology of at least zusil for її dbaylivoї exploitation.

The technique may have a body length of 1300 mm, and the width and height should be 550 and 1100 mm. The capacity of the fire tank should be 3.6 liters.

For the productivity of the Krit motoblock, a 4-stroke power plant is awarded, which is released beyond the cordon. Go about the 1-cylinder GreenField GX engine with an overhead valve layout. It is also significant to the piston group with the sleeve, the liner and the chavun material. To start the engine, it is necessary to properly spin the manual starter.

With a working volume of 0.2 liters, the GreenField GX engine develops close to 6.5 horsepower and can turn over 400 engine hours. Є pіdtrimka vіtchiznyany gasoline not lower than AI-80. Oliya wins only recommended brands.
In addition, as an alternative, a version with a smaller strained 2-stroke dvigun of domestic production is suggested. The robotic resource is notably small for today's worlds, and does not exceed 4000 motor years.

Running in

Running-in before the first trial is an important procedure for any walk-behind tractor. For this reason, the run-in was carried out in the first place before the full operation. The whole process is about 8 years old. On the spot, and after running in, it is necessary to re-evaluate the worker's rіdin, and if necessary, add oil and fire. It is a great respect that the first stage of running-in is responsible for the revision of the practicality of the engine, as well as other nodes and units. Zocrema, it is necessary to give respect to the fact that the gearbox is clearly working. It is possible to adapt to it. Another important point is the operation of the walk-behind tractor during the running-in period, it sounds according to 50-hundred-thousand vanity. We’ll cook the Mole for the rest of the year until the final victory.

Vitrati Paliva

In this case, most Vlasniks agree on thoughts, and their reports about vitratypal practically avoid the official records of the virobnik. Both engines have approximately the same speed, although the import option is more productive. The average amount of water in both engines is 1-2 liters in the fallow period.

Prices from Russia

Narazi motoblock Mole continues to run. On this model, a stable drink is chosen - rich in why the winds are low prices, compact dimensions and high functionality. Thus, it is recommended that the cost of a new walk-behind tractor on the Russian market be 17 thousand rubles for a basic package. The most complete version will cost 30 thousand rubles.

At the link with the fact that the Mole has long been used on the market, it is often possible to get it on the subprime market. As a butt, we look at a six-fold copy with additional options and other different possessions. The price of such a virobu can reach a maximum of 15 thousand rubles.

Motoblocks Mole 1 and Mole 2 successfully compete with domestic and foreign models. So, among analog cars you can see the Neva MK-200, as well as the Patriot 7.0/600 FB PG.

5514 07/28/2019 8 min.

The cultivator "Krot" is produced from the conveyors of Omsk and the "Moscow machine-building enterprise named after V.V.

The organization announced its foundation in 32 years of the last century. Piston engines and diesel engines for aircraft were vibrated at the plants, which were delivered to Aeroflot. After ten years, the company began to vibrate first in the country's jet engines, which were installed on vinyls.

Until the end of the 1970s, aircraft of this class were equipped with turbojet engines, which were made by themselves at this factory.

The design of the Radyansky cultivator "Krot" began to be taken up in the 80s, 3 years after the start of the production of wines and releases from serial production. "Mole" is produced by the Moscow Machine Building Enterprise named after V.V.Chernishev.

The largest motor cultivator "Krot" MK-1 vibrated like a single-cylinder unit, like a cultivator in the soil.

Learn more about the work of the Moscow Machine-Building Enterprise named after V.V. Chernishev on the video:

On this day, the technical features of motor cultivators have become significantly greater;

Today motor cultivators are equipped with engines from light companies. I significantly improved the cultivation process.

Motors, like being installed on the "Mole" in the era of the Radyansk Union, often lashed out and were not so strained, showed more dbaylivy vіdnoshennia, they were periodically needed to be vimicated.

Alas, everything changed with fate, easy maneuverable machines, such as: cultivators, manuals, can work whether it’s a land plot regardless of the folding of the robot (Read here).

Today, more foreign companies are turning out analogues to motor cultivators "Krot", for example, the Greenfield company - and it's better to take a drink on the company's equipment.

Catalog of models that sk_lki stink koshtuyut

Motor cultivator MK-1A-02

The oldest and ninest comrade, who "does not stop the furrows." This motor cultivator is equipped with a two-stroke engine - let's just say it.

Main technical features:

  • gas tank capacity: 1.8 l;
  • shaping the shank: 35, 60 cm;
  • Varity: 19 thousand. ruble

Crete 1

Features of an overhead motoblock with an internal combustion engine:

  • engine - 4-stroke, 1-cylinder engine of 6.5 liters. with chilled-out type;
  • engine model mistkistyu - GF 168 F-1 (GH200), 196 cm3;
  • engine productivity - 6.5 hp;
  • gas tank volume: 3.6 l;
  • oil tank volume - 0.60 l;
  • shaping the shank - 400-600 mm;
  • shaping a dilyanka for clay - 150-250 mm;
  • one gear can only go straight;
  • Varity: 20 thousand. ruble

MK-1A-01ts

This is a light walk-behind tractor, which is used on A-76, AI-80 and oil M-12TP.

Technical features:

  • engine of internal combustion: what works in two strokes with cooling of the superficial type;
  • engine productivity 5500-6500 rpm. - 1.9 kW, 2.6 hp;
  • gas tank volume - 1.8 l;
  • vaga - 51 kg;
  • ShDV p_d hour of work and warehouse: 130 x 81 x 106 cm;
  • pressure per milling hour - 150-200 m2/year;
  • Varity: 15 thousand. ruble

Tsya model є odnovisny motor-cultivator.

Technical features:

  • motor GoeTek productivity 3.5 hp;
  • shaping a plot for clay - up to 25 cm;
  • shaping a plot with a width of 35, 60 cm;
  • fire tank volume - 1.8 l;
  • you can cultivate a farm, and you can cultivate yoga;
  • Varity: 10 thousand. ruble

Model M

This is the smallest model, I represent the virobnik. On the front part, there is a roll-up of the transportation wheel, the main thing is the design of the model according to the other equipment.

Lawn mowers are actively vikoristovuyutsya for the cultivation of both home gardens and industrial vineyards. You can find out about the best Stiga lawnmower models.

Kamaz 6520 is a worthy and practical self-skid for any minds and in any situation. indicate all technical characteristics.

- all special equipment of high quality. Vіn vporaєtsya z be-like the most sophisticated technological tasks.

On the "M" I once attached milling heads, which are used for the help of a Honda engine.

Main parameters of expansion:

  • dozhina 100-130 cm;
  • width 35-81cm
  • height 71-106cm
  • masa (without paliva) - 48 thousand. G;
  • cutter diameter (rotor with knife), cm 32;
  • two gears can move forward and backward.

Technical features:

  • dvigun honda;
  • dvigun of internal combustion: what practices in chotiri tact with cooling of the superficial type;
  • engine volume 118 cm3;
  • cylinder diameter x x piston 6 x 4 div;
  • maximum productivity 4l/s/4000 rpm;
  • maximum torque that turns out to be 0.75 N * m / 2.500 rpm;
  • stained glass model 230g/kW*year;
  • shaping a shank, cm 35 or 60;
  • cutter with a diameter of 32 cm;
  • one gear can only move forward.

Theses features:

  • motor 168F productivity 4.0 hp; pratsyuє in 4 cycles with cooling of the repeated type, single-cylinder, valves roztashovani beast;
  • productivity: at 3600 rpm. - 4 hp;
  • motor tension (hours) 1100;
  • vcheny starter;
  • volume of engine (mm.cu.m.): 1180;
  • cooling of parts, vuzlіv and mehanіzmіv poіtryam;
  • zavdyaetsya zavdyaki systemі: transistor magneto;
  • gas tank volume (arc.) 2.5;
  • Oil tank capacity (l): 0.6;
  • one of the gears, maybe go straight ahead, and if not, turn around;
  • Price: 21 thousand. ruble

Technical characteristics of this model:

  • motor Hammermann, 5.5 k.s., which works in 4 cycles, with one cylinder, valves are turned to the beast;
  • productivity: at 3600 rpm. - 5.5 hp;
  • manual start;
  • stained glass burner AI-92, AI-95: 395 g/kW*year;
  • cooling of parts, vuzlіv and mehanіzmіv poіtryam;
  • fire on the transistor magneto;
  • details of the crank mechanism are collapsing against the arrow of the year;
  • vicorist for robotics: SF, SG, CEA 30, CAE 10V-40;
  • gas tank (l.) 3.6;
  • oily crankcase capacity (l): 0.6;
  • shaping the shank (cm): 35, 60;
  • one of the gears, maybe go straight ahead, and if not, turn around;
  • Varity: 15 thousand. ruble

Technical features:

  • engine (name): Robin-Subaru EU-15 D;
  • productivity (k.s.): 3.5;
  • gas tank volume (l): 2.8;
  • two gears, you can go forward and backward;
  • belt zcheplennya, lance gear;
  • Price: 26 thousand. ruble

The whole unit with a motor, which works in 4 cycles, with one cylinder; cooling system of parts, vuzlіv and mehanіzmіv vіdbuvaєtsya by an intense stream of wind, є primus yogo circulation; є dodatkova plate that protects from the expansion of the earth.

Tse possession, which is most bought, which has successfully proven itself from the shortest side. On the back - the beginnings of their own nadenosti, but the two-stroke dvigun cannot be productive enough. If you align this model with the first one, then DDE 2 may add reverse gear to the additional gear, as it will make it easier for the operator to work.

B700II

The main difference between other models is due to the fact that the engine of internal combustion is based on domestic rather than foreign production.

Motori (characteristics and prices)

Motoblocks, like and other equipment, after a successful operation, it’s easy to get out of tune. As soon as your annex has arrived, the hour has come to change the engine, obov'yazkovo, wash the robots on the land.

Greenfield Pro111-4.0HP

Technical characteristics:

  • productivity 4.0 hp The whole unit is with a motor, which works in 4 cycles, with a 1-cylinder cooler of a superficial type, valves are rotated to the beast;
  • pro111-4.0HP (GC 120), Volume (cm3) 118;
  • diameter x. Piston stroke (cm) 5.2 x 3.8;
  • compression ratio 7.7:1;
  • permissible productivity kW (l/s) 2.9 (4.0);
  • primary productivity kW (l/s) 2.5 (3.6);
  • maximum dobutok force on the shoulder of the vazhel (Nm) 3.5;
  • sukupnіst vsіh priladіv and pristroїv, scho to ensure the appearance of an electrical spark of the transistor-magnetic type;
  • reverse starting mechanism (traction cable);
  • oil tank capacity (l) 0.6;
  • gas tank volume (l) 3.6;
  • saves fire (g/kW/year) 360;
  • dimensions L x W x (cm) 40 x 33 x 35.5;
  • wagon (kg) 15;
  • electric starter vіdsutnіy.

Honda GH120 SH4 4HP

Motor Honda GH120 SH4 4 liters. Productivity 4 hp The cylinder volume is 118 cm3. The whole unit with a motor, which works in 4 strokes, a carburetor engine, cylinder valves are rotated to the beast (ONV), parts are cooled, nodes and mechanisms are working every once in a while.

Yoga technical characteristics:

  • stained glass, 313 g/kW.year - 230 g/l.s.h;
  • dimensions dimensions, cm 30 x 34 x 31;
  • weight, 13 kg;
  • shaft diameter, cm 18;
  • zavdovka shaft, cm 50;
  • marginal productivity, 2.9 kW (4 hp) / 3600 rpm;
  • price 14805 rub.

Lifan 168F-2L

Description:

  • pressure 4.8 hp The whole unit with a dvigun, which works in 4 cycles, dvigun of internal combustion;
  • cylinder diameter: 6.8 cm;
  • piston stroke: 5.4 cm;
  • working volume: 196 cm3;
  • shaft diameter: 20 mm;
  • admissible productivity: (kW/rev. for hv.): 3.5 / 1800;
  • basic productivity: (kW/rev. for hv.): 2.9 / 1500;
  • admissible dobutok of force on the shoulder of the vazhel: 1800 rpm;
  • the mechanism that transmits and transforms the torque: Lance gear (2:1);
  • fuel: Non-ethylated fuel for cars;
  • gas tank capacity 3.6 l.
  • oliya: what is victorious in motors SAE 10V-30, 20V, 30V;
  • oil tank capacity: 0.6;
  • starts with a manual starter;
  • dry vaga: 16 kg;
  • dimensions L × W × H (cm): 31.2 × 37.5 × 33.6;
  • Price: 8800 rub.

Subaru-Robin EX13 4.5 HP

Dvigun Subaru EX13 has a capacity of 4.5 liters. The cylinder volume is 126 cm3. The whole unit is with a motor, which works in 4 strokes, an internal combustion engine, a single-cylinder carburetor. Cooling of details, vuzlіv that mekhanіzmіv zdіysnyuєtsya poіtryam.

The motor is equipped with parts of a crank mechanism of a horizontal type. Cost of such an engine is 16 thousand rubles.

Honda GS-135S1

Description:

Productivity 4.0 hp The whole unit is with a motor, which works in 4 cycles, the engine of internal combustion, the shaft is located under the head of the cylinder block (ONS), the shaft for the selection of the productivity of the expansions is horizontal, and it is cooled.

The Honda GS-135S1 engines vibrate with the rest of the Honda models.

Characteristic features of the engine:

  • model with single block cylinders and integrated toothed drive belts;
  • the minimum number of mechanical elements and the choice of light materials;
  • highly professional design regardless of working minds;
  • spozhivaє even a little pale as a parity with other models;

Honda's unique technologies are being developed. Motors do not harm the ecology, they work for the next hour on open and closed plots. You can easily get spare parts from official dealers and on the Internet. Cost of such an engine is 11,800 rubles.

Lifan 160F 4 HP

Motor productivity 4 l. and a cylinder with a volume of 118 cm3. Chotiriokhtaktna gasoline single-cylinder model with 30 degrees of naheal.

The Lifan 160F motor can compete with the motors for cultivators of viticulture for the pressure.

Vіdnosno affordable price began to get lovers of urban development and farmers, who often pay respect to the company's technology.

Also a great plus of Lifan 160F: a compact size of the engine, which makes it easier to transport.

Technical characteristics:

  • Vaga: 13 tis. gram;
  • cylinder diameter, piston stroke (cm): 6 x 4.2;
  • calorific value (g/kW): 394;
  • cooling of parts, vuzliv and mechanisms
  • the shaft is collapsing against the year's arrow;
  • zapalennya vіdbuvaєtsya in the lances of the transistor;
  • Varity: 8 yew. ruble

Video: Motoblock Mole - replacing the engine on Lifan 160f

Visnovok

A lot of amateurs of the rural state in the country know and are rooted by the motor cultivators "Krot", as if they have taken a leading position in the market.

It is easier to master the miraculously cope with the set tasks, the cream of which you can possess the strained engines of light makers, and you can clearly see their middle models of other virobniks.

Helper for the operation of the Motor Cultivator Mole Model MK-1A-01Ts

Motor cultivator "Krot" (further MK) - one of the first types of industrial cultivators of small-sized agricultural and agricultural equipment, applications for small (up to 25 cm) processing (milling without layer turnover) of the soil, fluffing, harrowing, planting . , urban and garden plots with cultivated area close to 0.04 ... 0.10 ha

All operations for the processing of the soil are carried out for the help of the working body of the MK - cutters (rotors with knives of a special form). The torque from the engine through the knuckle-pass transmission, the gears and the stars with the lancet are transmitted to the gearbox shaft from the fixed rotors on the new one.

Knives of the rotors, when wrapping, cut the layer to the ground, cry and remix them at the same time, calling forward the progressive movement of the MK forward.

Perevagoyu milling in povnyannі with a plow є the most beautiful fluffing of the soil, trimming and laying the trimmed weeds, as well as equal mixing with the soil of organic and mineral fertilizers for all depths of cuttings.

Zastosuvannya MK can also be used on important soils, when processing cylindrical plots.

MK is relatively easy to use, does not mean great places for saving, insignificant weight and dimensions allow it to be transported in the trunk or on the road of passenger cars.

To expand the functional possibilities of the MC, it is possible to expand the supplementary overhead pits, for the help of such vines, you can vykonuvat: subglottis, weeding between the rows, transportation of various materials on unpaved roads with hard floors, water supply from the water supply, mowing of grass (6 d.) .

Navesnі znaryaddya: vіzok, kosark, pumping unit and others come to MK for additional additional equipment (div. Addendum 7).

The model is given with a central frequency regulator wrapping the crankshaft of the engine, improved carburetor, a new filter and an addition to the reverse gear, which ensures a decrease in the operational cost of the fire, a change in noise, an increase in the resource.

The possibility of reversing will improve the operational capacity of the motor cultivator crit on drіbnokonturnyh plots, as well as during the operation of the MK with additional overhead projectiles: vіzkom, mowing thinly.

Okremі constructive changes to your helper may not be seen.

1. Headbands

MK of appointments for operation in areas with a moderate climate. Temperature check for hours of operation from plus 1°С to plus 40°С.

The term of the service of the MK is significantly increased, as if to comply with all the rules of operation, technical maintenance and savings, assigned to your helper.

UVAGA! Refueling the oil tank, regulation, technical maintenance and other types of work are carried out with a geared MK engine.

Strictly adhere to the strict rules of fire safety when working with easily occupied homelands.

Do not allow the fire to get on the hot engine and muffler.

Start the engine with the disconnected.

Operate MK only with installed covers.

In the event of a sharp rapid increase in the wraps of the engine, gently press the "Stop" button of the engine tooth.

Do not deprive the right-handed MK without seeing it.

The operator and especially people are always guilty of being on the safe side of the rotors that wrap around (1 m, no less).

When working in closed premises (greenhouses), periodically revise the engine and ventilate the premises.

When the reverse gear is turned on, the MK will switch over at the daily changeover code for the operator.

Do not allow reversing when the MC is engaged.

Do not release the locking latch when the reverse gear is turned on.

When carrying out technical maintenance (div. section 8) for paragraphs 8 "Replacement of oils in the engine" and 9 "Replacement of oils in the reducers", pour the recycled oils into the reservoir for further disposal through the filling station in the prescribed manner.

When working with the MK, it is necessary to set up individual protection against noise: earplugs or earmuffs.

Permissible hour of the operator's work for a working change may become:

without individual protection against noise - 2 years with a break on the 30th century;

with individual protection against noise - 3 years.

The term of the MK service is 7 years. After the termination of the term of service of the MC, it is recommended to use it through the organization "Vtorchermet" (recommended by a selected person).

Rice. 1. Motor cultivator MK-1A-01-C "Mole"

MC (Fig. 1) consists of the following main warehouse parts: dviguna 18; reducer 28; frames 2, 22; working organs-rotors 24, 25, 26, 27 with knives; number 23 (transportation); fire tank 5 with cover 6 and hood 7; gas tap 4; pipes 8, 17; handles keruvannya 12, 14; important control of the chains 11, the throttle 13, the inclusion of the rear and front walks 15; collar 9; casing 3; supports 19, 20; coulter 21; "Stop" buttons 10 motor teeth; electric conduit 16; shield 29; shields zahisnykh 30; handles 1.

6. Preparation of a motor cultivator before work

6.1. Warehouse MK.

Install the pipes 8 and 17 at the grooves 2, 22 (Fig. 1), moving the nuts of the bolts 17, 18 forward (Fig. 9). Move open the pipes with the openings of the frame and the reducer and fix them for the help of the removed bolts and nuts, having set the necessary height of the handles in front.

Install the clamp 9 on the pipes 8, 17 (Fig. 1), fixing it behind the additional screws, nut and washers.

Insert the handles 12 and 14 into the opening of the clamp 9, securing them behind the additional bolts and nuts, which contrast. Fastening details are attached to the bag for the tool. On the left handle, install an important throttle control 13. Change at the presence of sharp bends in the sheaths of the chain cable, reverse gear and throttle shutter. Z'єdnati vnutr_shnu block іz ovnіshny elektrichnoj z'єdnuvаcha 16.

The tip of the cable is attached to the bracket of the tension roller 14 (Fig. 9) behind the auxiliary spring. Insert latch 2 at the handle bracket 6. Spring and latch are included in the package of the tool. Cable control chains, reverse gear and carburetor fasten on pipes 8 and 17 for additional clamps that are included in the package of the tool.

For safe operation, it is recommended to vicorist the bag for the tool (hung), fastening it on the pipes 8 and 17 under the clamp 9: the upper part - the washer and the clamp fastening nuts, the lower part - up to the pipes behind the additional clamps

The folding of the rotors and the installation of them on the gearbox shaft is carried out from fig. 2. With the installation of the guard on the foot: the rotors are folded into two different pairs - the right one and the left one, and install them so that the cutting edges of the knives enter the ground for an hour, the movement of the MK forward.

Shield 29 inserts MK. Protective shields are applied.

UVAGA! After the complete folding of the MC, carry out the adjustment:

Clinopasovo transmission (div. division 8. 5.);

Carburetor control elements (div. division 8. 4.)

Attachment for reversing (div. section 8.13).

Tighten the fastening parts, loosen the nuts.

To clean the wheel from the ground, install a gap of 7 ... 10 mm between the wheel 23 and the bracket "a".

Coulter 2 insert zgidno z fig. 5, locking it behind the help of a special bolt, nut and latch.

6.2. Rozpreservation MK.

For protection of parts in the form of corrosion, MK should be conserved at sales. The first step is to proceed before the operation of the MK, it is necessary to conserve it in the following order:

Remove the hood 7 (small 1). Wipe with clean ganchirkoy or ganchiryam, we soak with gasoline, details, cover the tint with oily oil.

Take out the candles of the opir with the screen and the high-voltage drotom, after which turn off the candle.

Install the MK with a candle opening vertically on top.

After the help of the starter, install the piston at the top dead center position.

Through the opening of the candle, pour into the cylinder 50 ... 60 ml of pure gasoline, or pour 1 - 2 khvilini.

Place the MK in a horizontal position and rotate the engine with the starter 6...8 times (until the empty cylinder is drained). At the moment of scrolling, it is necessary to press that trim and in the closed position the button of the motor tooth.

Wash the candle with gasoline, hang it on a plate; put on the spark plug with a screen and a high-voltage dart, fasten the hood.

Wipe with paper (ganchirka) and wash in gasoline or extinguish the tool. Spare parts can be conserved if necessary.

6.3. Preparing a hot sum.

In the period of profit (the first 15 years of work), prepare a heavy sum of gasoline A-76 or AI-80 ek with M-12TP oil, AZMOL Start2T at a ratio of 25: 1, with MG-8A oil - at a ratio of 16: 1. Relatively mix that filter before filling the tank.

Rice. 2. Rotori MK

When mixing gasoline and oil in the gas tank, pour half of the entire amount of gasoline into the bag, then mix all the oil thoroughly, add gasoline and mix it again. With it forward, set the handle of the pouring tap to the "Closed" position.

After the completion of the production, the summish is prepared in a designated way at a spivvіdnenі 40:1, with MG-8A oil at a spіvvіdnoshnі 20:1.

TABLE of the required amount of gasoline and oil for the preparation of a heavy sum

UVAGA! Don’t beat clean gasoline (without oil), and also sum up, which was saved for over 90 days.

6.4. Controlling the oil level in the engine and gearboxes.

Insert the MK in a horizontal position.

Change the oil level in the engine reducer (Fig. 3) by turning the screw to control the oil level. The oil riven is forever to blame for the control opening. If the rhubarb is running, it is necessary to add approximately 0.U2 l of oil through the oil filling port.

Change the rіven olії in the reducer (Fig. 3), turning the screw to control the rіven olії. If necessary, add TAD-17 or MS-20 oil to the reducer through the filling hole. Pour the oil to the level, which shows the lower point of the control opening.

Rice. 3. Preparation before the robot and launch of the MC

6.5. Oil change.

When replacing oils in gearboxes, turn off the oil by twisting the plugs. Pour in fresh oil: for the engine gearbox - approx. 0.08 l, for the chassis gearbox - 0.5 l.

6.6. Transferring MK.

Transferring the MK to the point of robotic wicking, locking the wheels 1 (Fig. 4) behind the auxiliary axles and clamps at the lower position. 7.

Rice. 4. Transferring MK to the job

(Wheels 1 are fixed in the lower position, the coulter is lifted).

7. The order of work with a mole cultivator

7.1. Launch MK.

Install the important zcheplennya 25 (Fig. 3) (on the right handle) at the "Vimkneno" position; turn the nut 28 of the pouring valve 2 ... 3 turns against the arrow of the year; move the important throttle shutter 18 on 1/3 of the course behind the year arrow; push on the drowning float 22 carburetors and hold for 10 ... 30 sec. (Before the paliva appears); pull the cord 7 of the starter by 40 ... 120 mm (until the dogs are hooked), then pull it sharply at the back of the axis of the notched funnel to the body of the starter. After starting to warm up the engine on small wraps; for warm weather - 2 ... 3 minutes, cold - 8 ... 10 minutes.

7.2. Processing the soil.

Raise the wheels 1 (Fig. 5) and fix the axles in the openings.

Rice. 5 Working position of the MK and the operator (wheels 1 fixed at the top position, opener 2 lowering, the operator, guiding the MK, follows him).

Start the engine. Change, that the shutter of the carburetor of the vіdkrit is turned on, otherwise the engine for the hour of milling the soil may calm down. Overriding the importance of the seal in the position "Vimkneno", move the importance of the Throttle shutter behind the year's arrow. More shifting of the important shift from the position "Vimkneno" to the position "Uvіmkneno" calls out the overhead rotation of the rotors. It is recommended to carry out the connection in such a position of the MK, if the blades of the rotors are lifted and do not stick to the ground, before the start of the first start.

The working position of the MC and the operator is shown in fig. 5.

To lay down the depth of soil processing according to the position of the coulter: the more the coulter enters the ground, the more the coulter. It is recommended that the soil be cut when placing the bolt in one of the middle openings of the coulter.

The required width of the soil treatment is regulated by the installation path of two or more rotors (Fig. 2).

When processing the soil with 4 rotors, install additional shields behind additional fastening parts from the package (Fig. 6).

Rice. 6 Installed shields.

1-bolt 150200037

2-washer А6.12.04.026 GOST 11371-78

3-shield 150080018

4-shield 150080016

5 washer 6 Ph. Ok. OST 111532-74

6-nut 6Ts OST 1 33017-80

7-bracket 150080038

8-bolt 6-20-C OST 1 31240-86

Yakscho MK zbіshuє wrap with an one-hour change in the depth of the dressing, press on the handles, bury the coulter.

Like the MK does not collapse forward, but the rotors “burrow”, the trochs lift the handles of the MK and start doing yoga.

As soon as the MK is "driven" at the b_k of the broken log, then the part of the rotor goes along the shattered soil - replace the MK at the protilezhny b_k.

It is not allowed to vibrate the pidyomi or turn the MK with the inserted rotors, spiraling on the coulter, the shards can be brought to deformation of the frames.

In case of three-time work with MK, install the important lock at the position "Cleared", raise the blinking attachment 14 and the important will be fixed (Fig. 3). Tse allow not to embarrass the importance of the hour of work. To translate the value at the "Vimkneno" position, press the value as far as it will go uphill and let it go.

When processing a fluffy (sipkoy) soil, it should be noted that the rotors did not sink down near the soil, calling out the dvigun's overwhelm.

On important soils and cylindrical plots, the cultivation is carried out with a sprat of priyomiv, in balls, to increase the depth of the soil with an additional coulter. With this, good crushing of the breasts is available to the soil, and the most even structure is safe.

After the completion of the work of the MK, turn off the gas, remove the zeplennya and proprise 2 ... 3 min. at idle, then press the "Stop" button. Close the faucet. Carry out technical maintenance (section 8).

Switching from the front to the back and back is carried out only with the right engine for help important pos. 17 (Fig. 3) with a closed connection, pos. 25, i.e. for the visibility of the wrapping of the outer (working) shaft of the MK.

UVAGA! In case of twisted switching on, it is important that the reverse gear is switched on for a short time, after the rotor wrapping teeth are repeated, the reverse gear is switched on.

7.3. Regulation MK.

If you change the type of the wound robot and when working on different soils, it is necessary to carry out the regulation of the MC. The main regulation is determined by the correct position of the coulter, the number of rotors, the position of the handles.

The installation of the necessary position of the coulter should be carried out after the determination of the necessary depth and processing of the soil. Make a small plot of soil, remember, knives go into the yak clay, which wrap around, and set the coulter in the required position. If the required depth is not available, take one pair of rotors.

To change between the handles 6 (small 9), loosen the bolts 7 and nuts 8, to control, on the collar 9, install the handles in the required position, fasten the bolts and nuts. To change the height of the handles, loosen the nuts of the bolts 17, fasten the 18 lower ends of the pipes 16 on the reducer, set the handles to the required height and tighten them.

7.4. Operation MK.

UVAGA! The first 15 years of work (consumption of 9...11 liters of heavy sum) is a period of refilling. Do not allow the MK to be overwhelmed during the whole period: carry out the soil treatment in 2 ... 3 times per depth up to 10 cm per pass. Important throttle shutters should not be more than halfway down.

Categorically harrowing the robot’s trip (over 10 min.) MK at “idle” speeds, because in this mode, through a small windage, there is insufficient cooling of the crankshaft bearing, which can lead to overheating and jamming.

8. Technical maintenance of the mole cultivator

Technical services include cleaning, dressing, oiling, control, krіpilnі, regulating and other operations.

8.1. See that periodicity of technical maintenance of MK.

8. 2. Keeping an eye on the outer surfaces of the MK.

After the completion of the working process, it is necessary to thoroughly wash the saw, saw and wood, after which wipe it dry and hang it on the floor for 2-3 years.

8.3. Technical maintenance of the hot water system and threaded connections.

8.3.1. Pale system.

The tightness control is carried out visually for the presence of oil leaks and heavy sums. For the need to tighten the tightening of the threaded fittings, the replacement of the gum fuel hoses or the strengthening gaskets.

8.3.2. Ribbed z'ednannya.

The tightening of threaded joints was carried out only for an additional tool, which is applied to the ZIP, not allowing the appearance of threading.

8.4. Regulation of the K-41K carburetor and the system of the central regulator (Fig. 7).

Rice. 7. The mechanism of regulation of the K41K carburetor and the system of the air-center regulator of the motocultivator Mole

1- Carburetor K41K

2-Vazhil 150160100

3-Spring 150290043

4-bracket 150160004

5-Regulating screw 150200029

6-Rod 150160001

7-Spring 150290041

8-Vazhil 150260002

9-roller 150230041

8.4.1. Dvigun MK may have a centralized regulator. The function of the regulator affects the number of engine wraps installed by the throttle shutter, if the drive pressure increases or changes. The regulator can be attached to the attachment with weights that are wrapped on the crankshaft and a mechanical locking link with the carburetor throttle.

If the speed of the wrapping of the engine shaft changes, the throttle shutter opens, if the speed is increased, the wrapping closes.

When the engine is prepared for the regulation on the operating range of the wraps:

Single hіd 2400.. .2600 hv ""

The maximum turnover is 4500...4700 min "".

If necessary, it is possible to adjust the wraps during the operation process on a working, warmed up engine.

8.4.2. Idling adjustment.

Verify and install a gap of 0.2 ... 0.5 mm between the 8 and the reducer cap.

Adjustment of idling with carburetor screws "P" - the number (at the plastic cup) is small. 7 and "K" - yak_st at the position of the throttle shutter drive in the extreme (anti-year arrow) position in the offensive sequence:

With a way wrapping a gwent "P" change the turnover to the minimum stable;

Turning the "K" screw to reach the maximum rpm by ear (after reaching the maximum value, the rpm will fall);

Repeat the work with the regulation of the P and K screws 2 ... 3 times.

With proper regulation, the engine can work steadily in all modes.

8.4.3. Adjustment of maximum engine wraps.

Adjustment is carried out with the screw M at the extreme (behind the year arrow) position of the carburetor drive. When screwing in a screw, the turnovers change, when screwed in, they increase.

8.5. Adjustment of the wedge gear.

Proper adjustment of the V-belt transmission to ensure the proper operation of the clutch and the necessary durability of the V-belt.

The main pretension of the V-belt is carried out with the switched-on zcheplennі moving the engine 10 (small 9) vzdovzh frames 25 (for arrow D). Turning the screws 21, 24 forward with washers 20, 22, 23, remove the casing 19 and loosen the nuts 26 fastening the engine to the frames. The tightness can be maximum, but not the rotational wrapping of the rotors. The control of the regulation can be carried out by turning the engine more slowly after the help of the starter.

Dodatkove tension zdіysnyuєtsya behind the help of the tension roller with a way to change the position of the screw 4. Before the cob of the adjustment of the screw 4, it is to be screwed up to the stop. At the same position when moving, which is practicable, turn on the zcheplennya and revise the practice of MK with the latest attention. At the time of forking the belt, increase the tension of the roller with the wedge of the screw 4. Remove the screw 4 with the nut 3. Adjust the position of the stop 13. Loosen the fastening nut. The emphasis does not stick on the outer surface of the V-belt. Permissible gap І can be buti in the boundaries of 1 ... 3 mm.

It is allowed to use the V-belt with cracks on the inner diameter.

UVAGA! When the engine is fixed, it is necessary to follow the rotation of the pulleys 11.15 wedge-shaped gears. The pulleys are due to roztashovuvatisya in one plane. Permissible clearance is not more than 1 mm.

When installing the casing 19, the intermediate bracket G (on the inner surface of the casing) is not responsible for the torsion of the outer surface of the V-belt when fixing it, it is important to the clamps 1. The permissible gap B is to blame buti in the boundaries of 1 ... 3 mm.

8.6. Cleaning of the outer surfaces of the cylinder and the cylinder head.

The cleaning of the cylinder and the cylinder head polishes the saw, brud, surplus thickets near the distant surfaces.

Cleaning is carried out with a mechanical path with distant washing with water, wiping dry and drying on the floor for 2-3 years.

8.7. Controlling the priming system.

The control of the ignition system of the engine is carried out with a sharp look, watching the additional probe for the gap between the electrodes of the spark plug and rechecking the set moment of the sparking magneto.

Rice. 8. Mole cultivator ignition system

To look around the magneto 7 (Fig. 8), take out the spiral casing 6 (Fig. 10), bottle 2, screw in the flywheel nut. Install the flywheel sign on the flywheel, fasten the triplet with screws. Turn the bolt Ml0x20 (z ZIP) at znіmach, remove the flywheel.

More visual inspection of the magneto, with weakened screws of the magneto fastening and the difference of marks "a" and "b" on the magneto 7 and crankcase 8, close the screws. If it is necessary to dismantle the magneto plug, the electric plug 3, for additional twisting, screw the wire with the tips from the plug socket of the magneto, turn the tip of the plug 5 from the wire 4. Pull the magneto 7 with wires from the landing place of the crankcase 8, in front of the crankcase 8, in front of the Remove the high voltage wire from the magneto transformer. Storage of dismantled parts is carried out at the return sequence.

UVAGA! When the flywheel is installed, the keyways on the flywheel bushing and trunnions of the crankshaft should be carried out behind the additional segmented key.

Tighten the flywheel nut with a torque of 3.. 4 kgcm.

To avoid breakage of the screw of the high-voltage transformer, insert the high-voltage screw into the screw of the magneto 7 transformer for a length of 8 ... 10 mm.

A more visual inspection of the "Stop" button 1, low-voltage darts 2, electric horn 3, high-voltage darts 4, support of the most important 5.

In case of damage to the insulation, put the defect behind an additional insulating line.

To inspect the spark plug, 6 dismantle the spark plug, on the front of the engine, with the hood removed. Vykoristovuvaty tool, which is applied in ZIP.

At the time of throwing oil, boil or soot, clean the electrode and the thermal cone of the candle, clean the electrode and the thermal cone of gasoline, dry it and blow it.

Measure the gap between the central and bichnym electrodes. The gap is due to but not more than 0.4 ... 0.6 mm.

UVAGA! If you need to adjust the gap, do not allow a vice on the central electrode - it can lead to breakage of either the ceramic thermal cone.

The installation of the zapaluvannya candle is carried out by placing the ring of the lure in front, turning it in the direction of the hand until it stops, with the candle key pushed further away. When tightening, do not apply supra-mundane forces - you can cause the cylinder head to be cracked.

8.8. Repeated filter control.

The control of the checked filter is carried out by looking around the filter housing and the filter element. Cleaning the filter body cleans the saw, wood, overgrowth from the surface.

Remove the filter housing by screwing the nut on the filter housing, rinse and wipe dry.

Purification of the filter element is carried out by blowing through iterations.

The replacement of the filter element is carried out during maintenance.

In case of strong contamination of the filter element, it is necessary to replace it directly in the direction.

The folding of the repeated filter is carried out at the return sequence.

UVAGA! The operation of the MK without installing an element that filters is not allowed.

It is necessary to regularly re-tighten the nuts fastening the housing of the inspected filter.

8.9. Cleaning of carbon deposits of the cylinder, cylinder head, piston, MK aggregates, oil of cables of keruvannya.

To perform these operations, it is necessary to perform a separate engine selection: remove the hood from the bracket; tip of a high-voltage droid with a candle; turn the candle; remove the fire tank by turning the screw 21 (Fig. 3) at the carburetor krill and laying the carburetor cable from the groove of the reverse shutter, screw in the nuts and remove the cylinder head with washers and gasket; install the piston at the bottom dead center i, lift the cylinder uphill, remove the studs; vіd'єdnati muffler and carburetor; take out the piston rings, for which purpose to make steel or brass plates with a thickness of 0.2 ... 0.3 mm and a width of 4 ... 5 mm.

Clean the cylinder head, cylinder head, muffler, carburetor, clean the cylinder channels and the combustion chamber of the head from soot.

For the presence of the ledge at the upper part of the cylinder mirror (on the boundary between the work of the upper piston ring), remove the ledge with a sickle-shaped scraper or an abrasive tool, preventing the cylinder mirror from slipping below the ledge.

If necessary, clean the risiki, the scuffing of the mirror of the cylinder with fine emery cloth, worn creid and covered with olive. Dribni riziki not traced.

Clean the bottom of the piston from the soot and the grooves under the piston rings, frontally crimping the crankcase opening with a clean servo.

Piston grooves are manually cleaned with an old broken piston ring.

Cleaned the details thoroughly with a heavy sum. Check the thermal clearance at the piston ring sticks inserted at the cylinders, so that the piston rings fit to the cylinder mirror.

The piston rings are inserted along the hole into the cylinder to a depth of 8 ... 10 mm, proshtovhuyuchi їx the piston crown. The gap at the stick of the ring is due to buti 1 mm, troch more. With a gap of more than 1 mm, the piston rings are replaced with new ones.

Carry out the storage of dismantled parts and storage parts of the engine and MK at the return sequence. Installation of the piston should be done in such a way that the arrow on the bottom of the bula is straightened to the exhaust valve of the cylinder, to the muffler. Before installation, grease the mirror of the cylinder with tractor oil. Tighten the nuts of the cylinder head evenly crosswise. Replace gaskets as needed.

UVAGA! Installation: parts and folding units of selective folding: piston, cylinder, piston pin - vibrate as a set with the same color marking applied on the surface of the parts (div. addendum 4).

Grease the throttle control cable with grease.

Rice. 9. The drive mechanism (chain) of the mole cultivator

After folding the MK, carry out the adjustment of the elements of the carburetor control (section 8.4.)

8.10. Replacement crankcase cuff.

In the process of operating the MK, for the need to replace the cuff to the crankcase housing of the right vikonat, the following order of operations:

Remove the casing 19 (Fig. 9), pulley 11 and belt 12;

Angry oil from the engine gearbox;

Remove the cover of the dvigun gearbox;

Take out the drive gear:

For additional twisting, remove the cuff from the spring from the crankcase;

Zrobiti folding of parts of the reducer of the dvigun at the gate

succession.

Replacement of the cuff for the crankcase housing of the left one is carried out in the same way, moving forward the spiral casing, flywheel, magneto (section 8.7).

8.11. Silencer cleaning.

Purification of the muffler is poured at the distant soot and opened at the body of the muffler. To complete the operation, remove the plug from the body by unscrewing the bolts and removing the washers. With a gostri object, carefully clean the door and wipe it with a servette soaked in gasoline.

Folding the muffler is carried out at the return sequence.

8.12. Razbirannya that folded starter.

If necessary, replace the spiral spring 6 or starter cord 2 (small 11) it is necessary to carry out outside the selection. For this purpose, the starter of the engine and clean it in the saw and wood.

The selection is carried out in the following sequence:

Having pressed on the disk 13. take the lock 15, then take the details 8, 14, 13.9, 11, 12, 10.9.8 in sequence.

Like a starter cord 2 breaks, unwind parts of the cord from the spool 7 and the trim of the cord 4. remember the ways of attaching the cord to the spool and the trim. Replace cord. Before folding, smear all rubbed surfaces with one of the stagnant oils.

When replacing the helical spring 6, insert it, adding care, into the coil 7, having hooked the spring to the ledge at the coil, or put the loop of the spring over the tooth at the wall of the coil. Change the spring from the mounting rod. Check the position of the middle of the opening of the coil of the inner coil of the spring along the axis of the central opening of the coil. Between them can be buti 18 mm.