The best way to start with the simplest choices is to start with your first ones. Obviously, the roaring trojans and pivony look gaudily, or maybe it’s like that, it’s beautiful, but the “craftsmanship” is foldable, you just don’t see it. In order to understand "the basics" it is possible for you to begin with a simple magnolia. Until the speech, with such little quotes you can decorate the tree and bushes of the winter, approaching the appearance of spring. Well, you can create a harn composition of a booth, vicorist all those dry hairs.
In the form of a skin pad (it is necessary to prepare the insoles, the skils will be magnolia) next to cut the upper wide part at once from the neck. At this neck, it will be necessary to make 7 pelyusts, however, beyond the rim, and trochs bend them in the middle. Circumcise parts for a small hour and then hold candles over the half-lights so you don’t cut your hands with them.
Obviously, a magnolia cannot be green, brown, or transparent, the axis of which should be turned into a cornflower. For work, it’s best to take an acrylic farba, you can also vicorist a color varnish or an enamel. Don’t get confused, because you didn’t manage to evenly cover the surface with farboa, on the contrary, it looks like natural. If you don’t have any special lacofarb blends, then you can take the size of gouache, just remember that after hanging, you need to clear the magnolia with varnish.
If you need to embellish flat surfaces, for example, steel or wall dacha house, then learn how to work kvіtkovі heads - it's super simple. To the point, for which virobu it is necessary to kill the very day, the axis of which can be ruled by fireless virobnitstvo, roblyachi such heads are parallel with magnolias. Zvertaemo respect and for those who, in the form of containers, are without intermediary stale beauty of the finished virobu, so, most likely, you can see from the five-liter eggplants.
From the bottom of the plashechka, step a couple of centimeters, and gently wind the bottom. Cut the bottom along the lines, so that the blanks for the pellets come out. As the core will be vikoristana the middle, її next to fill with an undertorque.
Zvіdsi vyrіzhte і thin tichinki - zrobіt to the middle of the bottom of the arc thin razrіzi, then rot them in the middle, I'm going to need a dovzhina and shape. Put on the leather blanks in the form of a pellet, cut the obov'yazkovo and melt the half-lights of the igniters.
If you choose to embellish with flowers of budinok, then for farbuvannya you can vikorystivate decorative acrylic farby (they sound like farbuyut ceramics or sklo). If the decor will “live” on the street, then it’s better to take the scoundrel-like acrylic farbi for the outgoing robots. Farbuyte viroba in the color that suits you.
Of course, there is only one option for making a flower head, and then you can call for additional fantasy, “playing” with color, rosemary, the shape of the pellets and chicks.
Kviti from plastic plates - photo:
Do-it-yourself quilts from plastic balls pokrokovo
As if you are already a “stuck-out koristuvach,” then learn how to rob bagato-ball vouchers - the stench looks even more pleasantly. You need to learn how to correctly shape the details, vicorist half-light candles, while remembering that such a variety of work is best carried out on fresh look otherwise, you are welcome, as if you are well ventilated.We need to create cardboard templates for the details of the quotation. You will need to apply it to the plastic surface and circle it with a marker, then you will need to see the number of details. To rot the skin in such a way that the parts of the bulls were directed in one beat.
Use pliers or tweezers for the pellets, it’s better for you, and run the blank over the half-light candles or igniters. The shape changes, even if the heat is poured in, the plastic melts. The axis is only more unsafely retrimmed, even if the same material can be “oiled”. Obov'yazkovo oplavte і zrіzi, provіvshi polum'yam і contours. It is necessary to carry out such a manipulation with the use of blanks.
Well, now you will need to buy more tickets. You can “plant” them on PVC glue, or you can make a couple of holes near the leather details and sew them, scurrying like a masking with a decorative buzzer.
How to make a ticket from a plastic plate
Denmark kvіtіv іz plastіshok meister klass tell you about those, how can you make a slip on the legs, ready to put it in a vase, or, in a different way, decorate the interior of the apartment.It is necessary for us to paint 7-8 patterns before us, which will be the same for the form, but change for the size - the very fact and allow you to acquire a bud. Also, you will need templates for leaflets and sepals.
Apply the contours for additional marker on the plastic, sharpen, and then decide again for the color and size - to simplify the process of distant folding. For help, she sewed an opening in the skin details.
Harvest the skin over the half-lights of candles or igniters, then form rosemary pellusts - the stench is guilty of dying on the mountain. The center is not guilty of rozm'yakshuvatisya pіd hієї procedures, yogo should be covered with coins in advance, as it is necessary to trim it with tweezers.
The sepals sprout in the same way;
In order to build a stem, you need to pick up a weave. Її slid zrobity on a plastic basis. The middle part of the green plyashechki, which is lost, cut a spiral, it is up to you to finish it thin, about 1 cm. Also, cut the leaves.
Heat a spiral over the tongue of the candle and wind it tightly around the arbor, which plays the role of the stem. The same manipulation can be done with the leaves, but it will be necessary not only to give the necessary shape, but to twist the petioles.
Kucheryavі kviti z plashok plastic pokrokovo
If your interior has colonies or trumpets, then you can also properly decorate them - everything is necessary to grow curly do-it-yourself quilts from plastic balls.
Trim the bottom at the plastic plate, cut it in a spiral, so that a line with a width of about 10 cm appears. Melt over the candle with virizane needles.
Vykovyvayte schіlny papir for vіtkovyh votkovyh stencils, the stench mayut buti for razmіrom raznimi. Transfer templates to plastic and fold. Melt the details over the tongue of the candle, open a couple of openings in the skin.
Drіt is needed for the preparation of a flower blank, string beads or beads, as they will play the role of the middle. Choose to buy all warehouse parts.
At the leaflets on the needles, to make a test, if there is any sequence, open a flower for fastening. Fix the ticket and twist the tyaganin around the neck. Too much to bite with pliers and close the dart closer to the neck. Heat up the little bells over the half-lights and sing.
Take all the details at once and wrap them with a dart, filling a small loop.
Master the preparation, as well as the wonderful interior decor.
Kviti z plyashok plastic for the garden
Such a decor is wonderfully suitable for a garden plot, allowing you to grow both original and exclusive. Your judges will sing-songly recognize that you can create such a dastardly beauty with your own hands.
Draw large pelyustki from plashkovy plastic, from two sides turn them into a yellow farboi. It is easier to use the aerosol version (spray), but you can use acrylic as a whole.
After hanging the farbi, open the white base of the pelyustok. For help, pick them up from the dormouse. For the preparation of the middle camp in a good summer dance (yogo texture is on the scale). For the stem, vicorist metal shear.
To grow a sprat of such dormouse for the creation of a garden composition. Mountaineers can add to them, playful bdzhіlok and baril - wiyde stylіzovana pasіka.
On the front of the sprat of the vessel, fetch at different colors, or you can use red, erysipelas, white and yellow. Draw more thin "lokshini". Pelyustka-lokshina creak with a dart and place it at the neck of the neck - one flower is more likely to be trimmed.
For the stem, you can take a tree needle, a metal haircut or a worker. Wrap the stem with a viable material, for example, with a polyethylene liner, polished paper thinly. or you can just turn the stem into the color you need.
After that, as you take a chrysanthemum, you will need to stretch the pellets from the unbarred side with a knife, otherwise wind them on the olive, so that the stench curls up.
Kviti from plastic dances - master-class
For the creation of a wonderful little twinkle, you need to cut the little bun in two. Take that part where the cork is located and carefully cut the sharp edges. Trochs pіdіgіyte on the fire - tse allow you to give a twinkle of a garnoy form.
Get a quote in the color you need (it can be white. Violet, blue, you can fantasize and cover it with chickens), at the krishtsa open an opening in order to sweat the stalk. In order for the twig to be more similar to the right stalk, її you can make a green farboa.
Now you know, with your own hands and forever you can decorate the interior of your booth and garden.
If you think that it’s not for you, that you have offended hands “left”, and you couldn’t even wind a child into the garden, then don’t hurry with the vines. You can create beautiful flowers from plastic balls with your own hands for the treatment of ailments. It’s even simpler and everything that you need from materials, you singly at home. Until then, such a choice is a budgetary option to decorate for a dacha, for a house, go to such a room and like a child in a garden. Otche, let's do it! We offer you the simplest master class for beginners.
- Before that, how to start working with plastic containers, you are guilty of good її remember, clean the paper or plastic labels.
- So that your wishes were more alive and different, the dances were better than farbuvat. For whom it is best to take acrylic farby, but if you happen to burn it with varnish. Better yet, add acrylic lacquer from a color base. You can vikoristovuvati farba in cans.
- In order not to worry about the uneven plastic edges of the plate, otherwise it will not be exposed to fire, and without it you cannot get out of the plastic plates, it is especially important for cobs, make sure to wear mittens.
- So that it would be easier for you to create a good shape of colors, always paint them on cardboard at a glance of templates. And after them to work plastic virizki. To create a contour, wick a marker, an awl or a tow head.
Materials for folding quilts from plashok from plastic
Obviously, you should know exactly how to make clothes from plastic balls, you should know what you need. There is nothing complicated here.
Father, you will need:
- zvichayno well, dances, rich and different, to create different options;
- farbi and brush for application;
- candle;
- pliers;
- drіt;
- beads, namistini or gudziki for embellishment;
- hot glue gun for fixing parts and threads;
- cardboard and knives;
- marker, awl.
Come on, let's get started.
Do-it-yourself vouchers from plastic buns
Method 1. Robimo simple, effective tickets.
To get such a ticket, you need literally 10 credits. Before speech, you can create them richly, after which you grow a great bouquet, attaching stems. It is also possible to vikoristovuvat okremo, for example, for embellishing with them the surface of parkan or wall. You can create a whole panel of colors.
- Otzhe, back to back, paint the ticket on cardboard. One of them will be larger, the other smaller. Better take different colors plastic, as shown in the little one.
- Transfer the templates to the dances for the help of a marker, paint them. You can make a great flower from the bottom of a torn plate. Todі vy just owe over the skin burrows on the days of the growth of the rose from both sides.
- The blanks are ready, take them with pliers and heat them over a candle. Ale, don't overdo it. Be careful and vikoristovyte mittens.
- If the plastic becomes warm, the edges of the bottom of the plate will be cut open, as shown in the little one. Tse will be a big ticket.
- The little one just sees and heats up lightly to make it feel hot.
- Mіzh yourself, you can go for additional hot glue or thread. Embellish the middle with a garnier gudzik, a bead or a bead.
Method 2. Robimo chamomile
- You need more plastic plates. Such often are dairy products. Ale choose, schob stench boules without ribbed walls.
- The bottom of the dance is slid open.
- To grow chamomile, you just need to see neat pelyustki. For the stench to be equal, paint the back on the dance template with a marker. Or cut the back on two equal parts, then on chotiri and six. Round off the edges of the feathers. Ale, it's easier to paint on the back. Virіzati pelyustki are needed to the roof.
- So that the chamomile was plausible, look for dances with an orange cap, or you will know it well, or you will be fooled.
- Z'ednayte two dances between yourself and zakripit їkh for the help of the dart or the thread, having first made the opening at the krishtsa for the help of the hot awl.
- Until chamomile, you can grow a stem from a dart, and decorate it with green leaves from a ball. For whom I will renew, paint the templates, revise and give the shape to the fire.
Method 3. Robimo Troyandi
- Paint patterns of seven colors, different roses, like a little one. All warehouses are one ticket.
- Get it out of plastic. Take different sizes of pads for a leather jacket.
- At the blanks, open the middle with an awl for squeezing the pellets between each other.
- They gave the leather plastic card to fry over the fire, so that the edges were deformed.
- Combine all these colors into one, add a garniy buzzer to the center, or namistina.
- To grow a stem, take a green color dance, cut a spiral. After that, heat over the fire and wrap around the dart.
- Add a leaf to the trojans.
Method 4. Robimo tsinії and chrysanthemums
- I navpil a plyashku.
- Dalі razr_zaєmo її up to the lid on thin swag. Robimo more 2-3 such blanks. You can take dances with a smaller diameter, so that you can see the colors more volumetrically. In these blanks, you can cut the neck.
- We heat the workpieces over the fire, twist with a knife or with a thin knife at the back burner. So we work with us with dances.
- We insert one card into the bag and fix it with hot glue. The middle can be worked out from the lids, so the kvity will be more similar to the tsiny. If you miss it without it, then the flowers will be similar to chrysanthemums.
- Robimo from the drotu stalk.
Method 5. Robimo sleepers.
- We take the puffs, we take the bottom of them, two puffs are needed for one ticket. The bottom is not visible and farbuyemo in brown color, as it is not like that.
- Farbuyemo dances are equal in yellow and green colors.
We all may be weak to quits. People give "million red trojans» the beautiful half of the people, confirming their feelings. Children give gifts to mothers and grandmothers at eight o'clock. For rich women, this is not enough, and the stink of shattering piecework, having been equipped with farbs, scissors, and glue.
All qi apply to do it just at the vikonannaIn this rank, the majestic number of themselves appeared wondrous virobiv from plastic bags. Well, we want our apartments to please the restless people, regardless of the weather, the soil, watering and lighting the garden and the city. Tse means that we can look at it as much as possible, as much as possible in such ways:
- easy to prepare;
- do not forget the farbuvannya, at every time, folding;
- harmoniously fit into the present landscape.
Zvichaynya dances are easily transformed into kazkova beauty The descriptions of the master-classes of the most distant selections for the garden follow the statistics. Vyvchivshi tsі apply, You can prepare with your own hands whether it's flowers for the garden.
Forgive me that wicked little quotes from plastic balls without farbuvannya
Zvichayno, persh for everything, I want to grow chamomile for flower beds. You can make from parts or whole dances of white color. Yak core pidide kryshka yellow color or dense in the form of a brown container. Leaves of roslin can be prepared from green containers. The stems can be made from darts, trumpets, fittings from a tree. Stop following the green farboa.
Let's take a look at the preparation of chamomile from three white pokrokovo dances:
Convalії z bіlih plyashok for dacha also look miraculous. Fallen, in the presence of the container, vicorist the upper or lower parts of the dances. The pellusts of the convalії can be made round, hospitable, and also bent. Fallow in the material and the diameter of the stem of the bud is fastened with screws or with a dart. The leaves of the convalії are hand-made from a five-liter eggplant, lowered with the neck down. Letting the leaf get a bit of a farbow.
Kulbabi roam in a different way. Bili kulbabi can be made from dances of the same color. For whom it is handy to vicorate the upper parts of the container, virizan at the sight of the gostry pelyustok. The leather detail is attached to the dart of the same dozhina of the hearth center. It was easy to come out cool.
A group of visionary dances can be closed to the scorched center. Viide the great kulbaba. If you create a spacious structure with kіlkom centers, you can build a majestic kulbaba.
Dzhe tsіkavo look kolorovі kulbabi, prepared from containers of vіdpovіdnogo zabarvlennya. Look at Pokrokov instructions preparation of brown red:
May we enchant the buds for the help of the enchanting candle
Half a candle to create a diva with plastic balls. Look at the next photo. We can prepare just one ticket at a time, and you can repeat with your own hands, be it any other way.
Master-class preparation of a ticket from candle lighting:
- From one capacity, we can prepare these fragments, as in the photo below. The largest size is 8x8cm, the smallest is 3.5x3.5cm. At the center of the details, we prepare to open.
- The edges of the parts are melted for an additional half-light of the candle. The detail is trimmed to the side in half-light. Sooty dilyanka is easy to clean. Don't get caught in plastic.
- For the stalk, we will use honeydew in isolation. It is necessary to clean the dart and bend it by 5-10mm.
- To cover the stem, we need to make a line from the green space with a width of 7-12 mm.
- The end of the line is inserted at the back of the dart. The string is wrapped around the stem and melted on half a candle.
- The stalk of the flower veiled green. Kіnets drotu cleared vіd іzolyatsії 20mm.
- Ready to paper a template for the preparation of leaves in a vіdpovіdno up to a little one.
- One more template is needed for leaflets instructed from a bud.
- Virіzaєmo behind the leaf pattern for living.
- Robimo for the pattern leafing under the bud.
- Melt the edges of the leaves under the bud. Marvel at the photo like it was.
- Leaves for the petiole are melted along the edges, and the plastics of the females, which zh'ednut, are twisted over the half-pits.
- Guilty to visit the little girl, like in the picture.
- For the help of a half-light, we wrap the base of the needle around the stem. On the protruding part of the dart, the leaves are pressed under the bud.
- The back is pressed on the largest fragment of the petals to the bud.
- Consistently pushing the buds on the bud of the world has changed its size. We try to burn the pelyust so that the stench cuts the gaps between them. Kіnets drotu zaginaєmo pasatizhami, sob pelyustki not called. The card is ready!
Robimo kviti for flowerbeds, the rate is to decorate the fence; vikoristovuemo farbi and great plyashki
Quotes from plastic balls for a bet - it’s still relevant. In the simplest way, you can make a latte from a day of white puffs, as shown below. The heart of the flower can be easily imitated with a cork of a yellow color.
Let's take a look at the master-class preparation of folding tickets for the rate:
Yaskravy dormouse will become a good adornment for flowerbeds, and for the city. Like bachite, yogo can be prepared differently. The sonyashnik's pellets look badly, vikonnі z tari brown color. The core can be a disposable plate.
The simplest way is to win a 5 liter plastic bowl. The workpiece is visible from it, as shown below. Pelyustki can be caught with a yellow farboi.
After farbuvannya it is necessary to light the cap on the neck. The core of the dormouse is hand-made from the lower part of the brown plate and screwed to the cap on the neck of the dormouse with a screw.
Great suites in the riverside on the vlasniy dilyantsi.
Giant growths sprout from large plastic eggplants. The images below the red flowers are smashed just like we were smashing a camomile.
For skin growth, three 5-liter containers are required. The heart of the flower is the lower part of a large plastic plate. The construction of bjil is obvious.
Seeds of a majestic yellow flower were prepared only in one large bottle. Like the core of vikoristan, there is a great brown capacity. Її the lower part is torn with swags of 1cm frills, like zabarvlenі.
It is easy to embellish the fence with plastic vouchers. We already know how to get all the answers. Like a bachite, zastosuvannya farb complicates the work and expands the possibilities. Zvernіt respect, navіt old parkan, embellishments with scary quotes, a little bit young.
From plastic dances it is easy to work the vases: the stench does not rot and do not break! Bring butts in flowerpots simple at the vikonan and accessories at different minds. Flowerpots made of plastic beads can be placed on the ground, on the parkan or on the wall.
1. ORIGINAL BOUQUETS AND WONDERFUL COMPOSITIONS WITH SINGLE QUITES
Plastic is one of the most advanced and most handy materials for making different kinds of products with your own hands . On the site you can know the rich pokrokovy master class, instruction and video lessons, for help some navit master-pochatkіvets can robiti toys, vazi, palm trees , zvіryat that іnshі wares made from plastic balls.
Have tsіy statti mi rozpovimo you, like from a wonderful plastic plate look at the blanks at the sight of pellets, stalks and leafing for patterns, and then give these details I will need a form for an additional half-width of a candle. Z cich plastic parts can be folded such as tickets, like poppies, trojandi , daisies, dormouse, tulips, gladiolus, lilies, latattya.
Of such inappropriate handy materials Like plastic plates, eggplants, empty containers for shampoo, you can make plastic sheets with your own hands. You can make a flower arrangement for the garden from one large plashka, and from the twisted details one 2 liter plashek can be shattered small bouquets with flowers . A bouquet of self-made flowers creates a radiant mood and hopes for a Christmas look. A lot of current designers in the interior from the satisfaction of vicorating piece tickets. manual robot and other types of plastic as decorative objects.
Do not rush to empty the empty plastic container for smittya. You can give this universal material to a friend of life, vicarious yogo in the preparation of piece cards, children's toys and toys, and thin women's embellishments . Deyakі designers to create miracle bracelets, brooches, hair accessories with vouchers and others embellish with non-adherent plastic. 
Virizana z PET dances of pelyustok, be it form, are easily processed by hands or half-witted, and also twisted well, cut and glued together. In order to create piece ticket looking as realistic as possible, you can use the necessary color for the help of special farby (about those, you can beat the farb for plastic farb, peaceably lower).
If you are careful, if you look at the shape and stuffing of the pellusts, the packing of the sepals and tartares, the virgin stems of the living flower, then it will be easier for you to work with your own hands the piece of plastic flowers. Seeing the harmony in the proportions of the elements, to make a handmade flower, you will quickly learn how to put together a side composition and thinned flower bouquets.
For the sake of commencing the preparation of a ticket and other types of PET buns:
in front of the cob, it is necessary to carefully wash the plaque, take stickers and labels, then we will dry the unpretentious material well;
In order to beautifully visualize the preparation of a pellust, leafing, sepals from plastic, obov'yazkovo to create a pattern-vikryka from a thin piece of cardboard. You can draw a line behind the template for viewing the workpiece from plastic material, you can use the sewing machine or the sewing needle;
The shape of the petals can be pressed manually, in front of the heating I prepare candles over the half-moons;
You can fill the plastic base with the main color before cutting the PET plates and working over the mold. Then you can pidfarbovuvati that sinking ready virib, approaching old look tickets to the original.
What is the best way to make farbuvati from plastic:
Samy ideal option for painting colors from plastic plates - color acrylic lacquer;
Beautifully look the tickets made of plastic, stuffed with acrylic farbs. Ale, in order to keep your first look safer, coat it after hanging farby with barless acrylic lacquer;
Outdoor options, products for the garden, dachas or the city can be made with aerosol farboa from a can (for lovers of small graffiti, such a farba is exactly є);
Another option for rozfarbovuvannya embellishment at the sight of the flowers near the garden or in the city - enamel farbi. If you want to spare, instead of coloring farb, buy white enamel and add colors to it to get the necessary color;
Automobilni farbi is also a long distance to a splendid infusion. Ale, do not buy such a farba in jars. Shorter version- autofarba in cans;
Stained glass farbi cannot be called cheap stained glass material, ale pofarbovanі tsimi farbs kіti from plastic look just gorgeous!
2. YAK SVIDKO ZROBITI IS MUCH BEAUTIFUL A QUOTE FOR A LOT OF PET BOTTLES
- 1.5 or 2 liter plates need to be cut across approximately in the middle. If it is possible to cut it, I will prepare it with good scissors on the neck of the bag to the neck;
Twisting qi smuzhki in return bik with scissors, heating the husk forward over the half-lights;
In order for the ticket to become large, it is necessary to add more sprats of the same blanks from the flasks and insert them until the first blank is cut (their neck can be cut, leaving only the smudge);
Twisted knots can be sealed with glue Moment. Additionally, a sprig of twisted plastic sleeves can be glued to the center of the card, so that it looks better and bigger.
3. MEISTER CLASSIC PLASTIC PACKAGING
Master class No. 1:
YAK ZROBIT ORIGINAL QUITE FOR PLASTIC BOTILES. KILKA LESSON IN PREPARING ROSES, MAKIV, GEORGE WITH OWN HANDS AND PHOTO OF READY EXHIBITS.
Master class No. 2:
YAK TO ZROBIT POLOV KVITKA ІZ PIVTOR LITER PLASTIC BOTTLE WITH LIPSTICK, LEAVES, STEM. ROBIMO CORNWELLS, DAMOSHI AND OTHER QUOTES FROM VISIONING FOR THE TEMPLATES OF PLASTIC ELEMENTS, We make custom-made bouquets for embellishing the interior.
Master class No. 3:
WE WANT TO WORK WITH YOUR OWN HANDS A SIMPLE KVITKA, VIRIZAyuchi TRANSFER FROM PLASTIC BOTTLES AND SHAPING ЇM FORM WITH HEAT PROCESSING (OVER THE SWITCH PROGRAM). Pokrokovy MK for pochatk_vts_v.
Master class No. 4:
GREAT BOUQUET OF PIECE TROJANDS WITH PET BOTTLE. HOW TO VIRIZAT THE ELEMENTS OF THE FILTER FOR THE TEMPLATES, HOW TO SEND THE PLASTIC LIPSTICK TO THE ROSE I WILL NEED THE FORM OF THERMAL TREATMENT IN THE OVEN.
Master class No. 5:
I looked at the same time a dozen of the most famous colors, which you can create with your own hands.
However, this topic has become so broad that today we can show you other options for plastic colors. For the cob, I want to bring butts to the most versatile options for colors from plastic containers - from small embellishments, to majestic pieced growths for the garden and the house. Marvel, repeat, work yourself!
In order to know how to fight such beauty, we had a chance to surf the vastness of the Internet. As a result, we selected the most beautiful tickets and report instructions for you.
Axis, to marvel, for example, some kind of garniy poppy from a plastic plate was invented by that right-handed smile of Nadiya Shurigina.
Try to repeat this masterpiece?
We need:
- plastic plate for kefir;
- plastic dance of green color (for the preparation of the stem and leaf);
- scissors;
- candle;
- black tovst thread that head;
- a small piece of drotu;
- a bag of gray fabric;
- semolina;
- glue.
From the main part of the plate, there are two identical stakes (Fig. 1).
Robimo on the skin 3 cuts, not reaching the middle of the harvest (Fig. 2). Round the skin of the pellets, as shown in fig. 3.
Virizaimo іz zelenї plyashki basis for the card and leaflets. The edges of the leaves are marked with a narrow fringe (Fig. 4).
Farbujemo future poppy seedlings with a chervonim marker (Fig. 4). Over the candle, we heat and deform the skin blank (small 5).
Now we need to work out the middle for the poppy and the chick. For tієї meth and you need a thread and a piece of fabric. 
From the fabric robimo a bag (you can put a small piece of foam rubber in the middle of the kukhl and pull it together) and it is tightly tied with a black thread, so that chastochki appeared (small 5). And for the chicks we cut the thread with males, we tie it in the middle, we wet all the edges in glue, and then we put semolina on the semolina, to take off the white kinchiks, like on the right poppy (small 5).
The stalk can be robbed just like we were robbed for the Trojans, or you can buy it already ready.
The storage is carried out in the same way, like in the forward version. Axis and everything - the poppy is ready!
Water lily from plastic balls
And the other lady saw such a pretty lily. I preach to you such a ticket.
For lily we take:
- 3 white opaque plates;
- 1 zhovta opacity dance;
- 1 great sulіy (5 liters) of green color;
- scissors;
- candle;
- glue.
Robimo blanks, like in fig. one.
We prepare the middle part of the lily for us. For this, in a yellow blank with a neck, 8 incisions are made for 8 pellets. The edges of the skin are rounded (Fig. 2).
From the other details, we work the middle for the lily. For which I will cut a fringe (Fig. 3) and, heating it up, I will prepare it above the half-width, twisting it, catching the edges in the middle at once (Fig. 4).
The edges of the first yellow part are also melted down (Fig. 5). We insert the curly middle into the opening at the yellow card (Fig. 6).
There are more details in the shape of the pelluses;
It is easy to straighten the lily paddles and take the already prepared ticket (Fig. 8).
In the process of work, we do not forget all the details and fix with glue.
Under the green sulіya we see the bottom, we melt the yogo edge and we plant the beast on our new flower, like on a great leaf.
The water lily is ready!
How to grow from a plastic plate in a vіdrazu 2 vouchers
It’s worth navit not one ticket, but the butt of that, as if from one plastic plate, you can create two tickets.
Materials:
- 1 plastic plate;
- scissors;
- varnish abo farba for farbuvannya pelyustok.
We take a dance that is cut into 3 pieces, as you see in fig. 2.
From the upper part of the robitimeme I first quote.
We take the workpiece and narizaemo її for swags - 3 vuzki and 1 wide - and so along the entire perimeter (Fig. 3–4). The edges of wide swarthes are cut under the hood (Fig. 5).
Two narrow females at the skin opening are killed and twisted behind an additional knife or a knife with cloves (Fig. 7–8). 
In the same way, trochs are processed and wide widows (Fig. 9–10).
Vuzki muzhki, which are lost, are twisted in a vertical position, creating a curly middle for a flower (Fig. 11). 
We cover the pellets with varnish (small 12). The first ticket has been broken!
For the other, we take the lower part of the dance so that we can cut it so that we take 5 pellets (Fig. 14).
Rounded edges of the skin (Fig. 15). Zafarbovuemo protruding part of the varnish. From i all!
And if you want to take a larger volume of the ticket, you can combine the insults described above into one. Zrobiti tse duzhe simply. At the other quote, make an opening in the middle, stick a sufficient neck through the plate, insert the base of the first quote there and twist the lid.
A ticket from plastic dances to a miner
And how do you like such a miniature miner with a ticket? Would you like a similar one?
We prepare materials:
Visible from transparent plastic detail, like in fig. 1. Heat it over the candle (small 2) and lightly burnish the edges (small 3).
From white plastic, a detail is visible, shown in fig. 4. So it is, like in front, trembling over the candle, the trochs are melted (mal. 5-6).
In the middle of the white workpiece, dripping glue and dripping beads (small 7). 
I’m ready to use the center so it’s glued to the center of the gap blank (small 8).
From the green plastic, there are details for the stem (Fig. 9) and leaf (Fig. 10). Twisting and twisting over the candle over the details, as shown in photo 9a and 10a.
Let's go over all the details of the ticket (Fig. 11).
If you want to plant your ticket in a potter, make it out of bright colored paper or cardboard. Cut the collar and twist from it the roll of the required diameter. Tighten yoga in the middle so that you take away the cone. Do not press until the end, so that the base becomes flat, and not gostrim. Cover the miner in the middle with glue, plant a ticket there, and open it up, suffocate it with beads. From i all!