Do-it-yourself plywood bed. Zrobimo softly with your own hands? For us, instructions and information are covered, for you - straight arms that hour. Robots with selected designs

The modern furniture industry is ready to propagate to potential buyers the great choice of the most attractive beds, but if such constructions are costly. To the very same, we suggest to you to work lightly with plywood with your own hands, spending less time on stained glass materials. Plywood is an inexpensive sirovina, it is easy to work with it and easy to see. So it’s easy, crushed with your own hands, to serve you more richly than a ready-made purchased construction, even if you buy another product, we don’t want to sing it like vikoristany material and reinforcement. It is self-contained and also ideal for people with non-standard dimensions, for which it is sometimes difficult to choose a comfortable bed in the bedroom. Let's just get acquainted with the report master class for the preparation of such furniture.

Do-it-yourself double bed with plywood

Before that, as if you were figuring out the everyday life of a plywood with your own hands, it is necessary to think about the availability of the necessary materials and tools.

Materials:

Wooden boards good quality tovshchina 4 cm and more.
Plywood (2-3 sheets) with a thickness not less than 1.5 cm. The same sheets are the standard size of this material.
Ready bar chi derev'yanі nіzhki. You can work for the bajans with your own hands.
Special carpentry glue.
Farba.
Shields of different widths: wide and narrow (for important areas).
Emery paper of great and fine graininess.
A set of screws for fixing the structure.
Bolts, nuts.
Washers for bolts.
Wooden folds for strengthening the frame of the sleeping bed.

Tools:

Roulette chi budіvelny meter.
The electric drill is the drill for her.
Number of keys.
Screwdriver.
Jigsaw chi razak for processing wooden parts.
Glue for lumber.

Head of robots:

We give the surface of the plywood smoothness for the help of an emery paper. We walk along the shoulder with a coarse-grained skin, and then with a coarse-grained one.

Important! Add special respect to the ends, as if they could be perfectly equal and smooth in front of the cob, folding the bed with their own hands.

We prepare the frame. Vipylyuєmo z 18 mm plywood posterior ribs, the height of which becomes 150 mm. Dovzhina nizhok is guilty of being short for your mattress by 3 mm. Rozrakhovuyemo kіlkіst vikoristovuvannogo material, vykhodyachi from two ribs of hardness and sidewalls through the skin 40 cm.
We choose the frame to the stick, because the comrade of faneri allows us to build such a robot.
We drill plywood and tighten it with screws.

Nіzhki:

We choose the details from the same material - from 18 mm plywood. Virіzaєmo L-like a wooden bottom and stretching її transverse and posterior ribs before the installed frame, vicorist for that short screws.
It creaks with old self-tapping screws.

Heads and sides:

Bіchnі partіnі lіzhka robimo znovu іz plywood. The sidewalls are attracted no less than to the later ribs of the frame of the sleeping bed, but to the transverse ribs.

Important! For fixation of plywood on the back ribs, short screws are used, for transverse ribs - double screws.

Vykoristovuyuchi pererakhovanі vishche diї, montuєmo uzgolіv'ya and lining in the legs. Follow the next recommendations: the height of the nodule above the frame of the bed can be between 20 and 40 cm.

Flooring

Vipilyuemo 10 mm plywood for the size of our sleeping bed (mayetsya on the outside of the frame, without fixing the sidewalls). This work is done with two plywood sheets, stitching behind it, so that the stick is perpendicular to the back ribs before the prepared frame. We add plywood sheets, 25 cm vrahovuchi rock. I cover the surface of the farboi with a sprat of balls, do not forget to apply enamel on the surface of the dried surface of the front ball.

A child is soft with plywood with your own hands

Plywood can be beaten to make a baby bed. We will tell you about those, how to grow lightly from plywood with your own hands. We will design a soft-machine for each master-class, as an effective addition to a child's room.

Pokrokovy algorithm diy:

We take plywood, as it is respected by an environmentally friendly material, or a natural tree. We can see the mark on the plywood behind the armchairs and the dimensions of your baby's mattress.
It is possible to prepare a sleeping place from plywood for an additional electric jigsaw.
Glue on a special edge stitch, resolutely ripping the edges.
Vikoristovuєmo small aluminum coils like a fastening element, in yakі it is prepared to open the self-tapping screw.
Krіpimo earlier vyrіzanі sidewalls with metal folds from the inner side to the plywood, which vikonuє function of the bottom under the mattress.
Turn over the child’s little folds to the side sides, the height of which may be such that the child could not fall from the bed of an hour of sleep that active igor.
We prepare a knotted bed from one sheet of solid plywood. Here you can turn on all your imagination: decoratively decorate the upper part, virіzavshi її hvilepodіbno, but vykoristati іnshу tsіkavі concept. Attach the upper part of the bed with self-tapping screws. Pіdgol_v'ya can but dosit high, equal and as comfortable as possible.
Mounted two hanging boxes in the lower part of the child's bed. For this, it is fastened to the lower part of the lіzhka from the side of the bottom to the additional transverse bar, which can be used to cross the boxes.

Important! In such a place, it’s smart to save not only bedding whiteness, but also to bring toys to children’s speech.

Rozfarbovuemo lizhko on vlasny rozsud. For the furring of the main part of the child's car, we vicorated black and white farba, and for the headlights - zhovta.

Sometimes it’s the same way that the plywood has a daily coating, that it’s laminated. Therefore, before the cob of the cob of the plank, it is necessary to cover the canvas with stain or farboi, and then pokat until it is completely dry.
Scrub the leather part with drying oil until the cob is picked up with your own hands. So you can find the most important places, and by yourself you can see the whole design of the sleeping place.
Give special respect to the edge of the frame, which is the responsibility of the mother, ideally polished edges, so that you could not get hurt when lying with your own hands. The height of the sidewalls can be such that the mattress cannot fall on the floor when it is moved.
For the preparation of a child's lizhk original design wink a detailed armchair of all the details that are beaten, with the improvement of all the parameters of your baby and mattress.
Razrakhovuyte dozhina plywood planks, vhodyachi zі svogo stanovnya that rozmіru statues.

Important! For the preparation of a sleeping bed, you can vikoristovuvat and boards for ozdoblennya pіdlogi, yakі will be no less costly and more economical for the budget plan.

Usі photo zі statti

In this article, we will tell you about those, which is the instruction for the preparation of children's furniture with the most accessible and simplest in the general category of lumber - from bagatospherical plywood. The topic of the article becomes of great interest, because the price of good furniture for cladding children's rooms in the temple. The most accessible elements of the entourage of the factory warehouse, as a rule, are distinguished by the low quality of preparation and the environmental safety due to the clarity of the materials that avenge phenol, such as chipboard.

In order not to buy cheap cheap clothes, and not to spend pennies on expensive furniture, you can work with your own hands. And in order to make it easier for you to get in touch with the set tasks, let's talk about those, how to independently choose children's houses from plywood and lightly.

Choose a folding scheme

Before that, it’s like preparing, it’s necessary to paint the armchairs of children’s furniture from plywood with your own hands, building with some constructive elements will be bought and purchased.

For example, it’s easy to paint the armchair of a child’s house from plywood with your own hands, and how to squawk you ready solutions, You can speed up with these schemes, yakі mi zaproponuєmo in this article. The main advantage, which can be proved, is the simplicity of the project implementation.

Life of a childish budinochka

A self-contained house for children made of plywood is difficult to understand, that in reality there will be suitable materials and tools.

For robots, we need the following:

zavtovshki sheet plywood 15 mm;
electric jigsaw;
an electric drill and a drill, the diameter of any longer width of the blade in a jigsaw;
emery paper;
lacofarb materials and brushes for their application.

The instruction for making a bundy is as follows:

clearly up to the proponated scheme, it is cross-created on plywood, the outline of the house;

Rozmіri konstruktsії podbiraemo іndivіdіdually fallow vіd rostannya dіtini.

for the help of an electric jigsaw, we pick out structural elements;
for the help of emery paper No. 80, grind the ends of the blanks, rounding the edges of the cut in such a rank;
sandpaper No. 100 sanding the front and reverse surfaces of the blanks;
cover all blanks of dekilkom with balls of furniture varnish with a break, necessary for hanging the leather front ball;
choose all the details to buy, as shown in the diagram.

Important: The design is ready, which will ensure safety both during operation, and even with a distant safety of the house.

Preparation of a roll-out bed

After that, as they looked at the instructions for folding the house, we know how to fumble a child lightly with plywood with his own hands.

In front of us is an armchair for a child. As it is possible to bachiti, the scheme does not show expansions. It’s grown unpretentiously, the shards of the preparation of a self-made lie are victorious with the improvement of the child’s growth. In addition, children grow up fast, that kind of viroba can be developed into virist.

The vibration is composed of two structural elements:

hanging base that zhorstko creak to the wall;
lіzhko, like fastened on the pedestal for additional turning loops.

Virib, demonstrations at ts_y statti, bude vykonaniya form avtomobilya, the same easy pіdіyde for the lad. Vtim, nothing matters about the preparation of the sidewalls, not the car, but the greater girlish shape.

For the preparation of a lizhka, you will need the following materials and tools:

plywood sheets zavtovshki 15-20 mm;
Г-podіbnі kіpіlnі metalovirobi for vykonanny kutovoy zadnannya;
sofa loops for installing a folding bed;
bolt with nuts, washers and self-tapping screws;
alyuminієvy kutochok for picking up support for laying flat;
emery paper;
lacofarb materials;
electric jigsaw;
electric drill with the function of a screwdriver;
hacksaw for metal;
compasses for making decorative wheels;
vimiryuvalny іnstrument ta olivets.

Preparation instruction:

on the plywood, the contours of the main structural elements are recreated: the bottom of the bed, the sidewalls and the back wall of the hanging outbuilding;
on the plywood, the contours of the car-sidewalls are crossed;

behind the help of a jigsaw, you can see all the structural elements;
virіzanі workpieces are polished along the ends and surfaces;

Purchased furniture has two main categories: the road is German. There is a need to put the legs in front of us: the frames are made of gray boards, stitched together with flowers, covered with a thin hardboard. An alternative is a forged lіzhka, which does not give up on a light-engine aircraft for a price. Let's try to make it with our own hands from plywood.

Materials and tools

For a double bed with a width of 1600 - 1800 mm and a length of 2050 we need:

2 sheets of plywood with a thickness of 18 mm and a size of 2500x1250;
2 sheets of plywood for a zavtovshka 10 millimeters quieter than the roses themselves.
Bolt screws 32 and 75 mm.
Drill screwdriver.
Emery paper for manual grinding, or, better, grinding machine.
Manual circular saw or electric jigsaw. (div. also article)

Porada: for straight sawing of plywood, nothing better has been invented for sawmills; however, to use a manual saw blade is not for everyone.
A compromise will be a saw blade for wood and that grinder.
To win respect: the tool is used without a full-length casing and it is not safe to do it.

Olifa and brushes.
Enamel.

Let's get to work

concept

We should have a middle bed between a double bed and a podium. Legs will be short, soft - low. Designer vishukuvans are not transferred; Whatever you need, you can add to your taste.
The main perevaga is mіtsnіst. It is unlikely that you can get a pair of named rhinos to make a bad boy. On top - flat and hard, under a spring mattress..
The back of the head is low, so that the pillows do not flow into the back of the head. At the legs and sides there are pads for three to five centimeters of hair behind the frame.
The beam is not victorious in principle: dry and well proliferated plywood is never screwed, it is often trapped with a tree. (div. also article)

The form is old look will be about the same. Material and design - original

frame

From the 18-millimeter plywood, the curl ribs are 150 millimeters later and the laces are 36 millimeters short for your mattress. The number of rozrakhovuetsya, vykhodyachi z dvoh sidewalls and ribs hardness through the skin 40 centimeters or less.
There are two transverse ribs at the frame, along the edges; dozhina dorіvnyuє dozhinі mattress + 5 mm.
The frame is assembled end-to-end: the community of plywood allows it. Plywood is drilled with a diameter of troch less than the diameter of screws and is tightened by them.

Important: all details need to be polished after waxing and before picking, giving special attention to the ends.

Nіzhki

The stench is also taken from plywood. Skin bottom - G-like profile. Material - the same 18 mm plywood; the bottom is attracted to the later and transverse ribs of the frame with short self-tapping screws and creaks at the end with long ones.
At the same time, the legs dodatkovo zmіtsnyat kuti lіzhka.

If you need extreme strength - and legs, and the frame is easy to support

Heads and sides

Sidewalls - overhead details with thin plywood on the extreme posterior ribs of the bed frame. To attach special respect to these lands of the varto. The stench is guilty buti ideally straight and good polished. The height of the sidewalls may exceed the height of the mattress.

Smooth not only the ends, but the cut. Menshe gostrikh kutiv at once - less sintsiv nadali
Tighten the sidewalls not only to the extreme later ribs of the frame for the help of short screws, but also to the transverse ribs - for the help of the other ones.
Uzgolov'ya and lining in the legs are mounted in the same way. The height above the frame is from 20 to 40 centimeters. Smaller - more beautiful: a great shoulder of importance can allow evil to inspire our pride lightly.

Flooring

Everything is simple here:

Vikroyuєmo 10-millimeter plywood for the size of the lіzhka (understandably, the frame, not the sidewalls). Kryati come from two leaves; the stick between them is due to the frame perpendicular to the posterior ribs.
It attracts plywood from a crop of 25 centimeters.

Zreshtoy, finale: once again we polish all the unevenness; farbuyemo emally yak at least twice.

Important dribnitsy

To drown the droplet of the screw - drill the hole with a drill bit of a larger diameter.
Samonarizi, to fasten the overlays, grind strictly symmetrically. The stench will be on the lookout.
Cover the skin with drying oil and dry until folded.

Visnovok

We looked at the most primitive construction. If you are not a newcomer with a robot with a tree - it is easy to know folding chairs in the armchairs, otherwise you can come up with them on your own. Good luck with creativity!

Furniture from a fashionable salon - not stylish, beautiful, often expensive, but not too long. Why? Not all builders successfully produce furniture, natural wood does not go through the technological process of drying. As a result, not everyone can boast of mіtsnіstyu and the great term of service. The second one on the right is made of plywood with your own hands, as you can pick it up on your own for the holidays. How tse robiti? Showing patience, trochs vminnya and z vidpovidalnistyu vykonuyuchi work.

Material for preparing a bed with a plywood base

So that the furniture was taken away from the bazhan’s balaclava, it was necessary to make it out of the fabric of the plywood, to lay the ribs of the hardness in the place of the greatest vengeance in the vіd vаgi of the people. Plywood for lying under a mattress, it is necessary to know the height, length and width of an orthopedic mattress. For the preparation of a double bed from plywood with your own hands, measuring 1800x2000 cm, the necessary materials and tools are:

Plywood 2500x1250x18 mm - two sheets.
Plywood 2500x1250x10 mm - two sheets.
Manual sawing or electric jigsaw.
Samonarіzi, іnodi vikoristovuyut screws.
Drill and grinder.
Olіfa, enamel and brushes for processing the material.

A lot of tools are available, for rich people it’s handy, and the material is inexpensive and you can do it. Plywood is spun using special technology, if thin leaves of wood are glued together one by one at opposite straight lines. For the rahunok of which the temple reaches the material for bending, later it is transversely wound. To that, for food, chi nadіyni lizhka from plywood and chi varto mastruvati lizhko from plywood with your own hands, the answer is unambiguous - nadіyno, and then follow the instructions to prepare.

Frame - the basis of bedroom furniture

Properly beaten, ensure the reliability of the furniture construction. Before the cob of the cob, a recommendation is to make a chair in detail made of plywood with your own hands. After that, rozkrіy on the details and gluing the ends with an edge stitch. For sawing the vicorist, use an electric jigsaw, a circular saw, and for gluing the edges - a hot grinder. How to make lightly from plywood with your own hands:

Gluing the ends should be done on both sides with a sanding sponge, moreover, it should be used for the skin of the prepared part.
So that the elements were trimmed for a long time, before twisting the parts with self-tapping screws on the surface, which stick together, apply carpentry glue.
From the 18 mm zavtovshka sheet, the posterior ribs are sunk - the height is 150 mm, the dozhina is 35 mm shorter than the orthopedic mattress.
Croc for the installation of the late ribs - 400 mm;
There are only two transverse ribs of the rigidity of the frame. The stench is more expensive than the width of the mattress plus 5 mm.
The frame is picked up. Finishing this material allows you to drill open the screws. The base is tied with self-tapping screws.

The next stage of preparation is the installation of the bottom. It is possible to viconate at the look of the L-like plywood profile, while the frame takes away the additional materiality and support. To the later and transverse ribs of the thickness, the legs are fastened to short screws, and to the end of the rails - to long ones.

Sidewalls, knots and flooring

Ale, the frame is still not ready for plywood with your own hands. The sidewalls are wound from a tow sheet 18 mm and fastened behind additional furniture bolts to the later elements of the frame. The sidewalls are neatly trimmed with an edge stitch, covered with linseed oil and farbuyut. The height of the sidewalls is chosen individually, but the stench is to blame for reshuffling the mattress and wearing it for another day. How to make lightly from plywood with your own hands:

Bіchnі parts krіplyat і to pozdovzhnіh, і transverse parts of the frame, mіtsno tightening with bolts from the base of the lіzhka.
The heads are also hardened to the ground. It is recommended to build a knotted bed with your own hands from plywood so that it hangs 200-400 mm above the frame, no more.
For the preparation of vicory flooring, use a thin sheet - 10 mm. Expand the flooring to match the internal dimensions of the frame.
The flooring is polished, polished, farbuyut at two balls and placed at the frame, after which an orthopedic mattress can be placed in the middle of the bed.

As for the legs made of L-shaped plywood, they are foldable, you can replace them with supports made of wooden beams. It is recommended that the height of the lower leg does not exceed 20 mm. When assembling them at the end of the frame, they stepped out by 5 cm, so as to drown the legs on the stand.

A simple design can be supplemented with decorative elements and practical drawers. For whom it is necessary to take a chair or independently develop a scheme. For food, some kind of veneer plywood for lizhok, fakhіvtsі vіdpovіdat: vіd 10 mm vіd 10 mm vіd 18 mm vіd 18 mm vіd іd 18 mm vіdіnі karka, bіchnyh slats i uzgolіv'ya. And what is important to us is the importance of the well-thought-out design.

A child is soft with plywood with your own hands

You can make a soft bed for a child from plywood with your own hands. It’s more convenient that you can make a small child lightly a car with plywood with your own hands, as if you can easily spread out at a child’s room.

The simplest option, how to grow a child softly from plywood:

Take plywood, shards won't be an environmentally friendly material, or vicorous natural wood.
Mark the mark on the sheet behind the armchairs and the dimensions of a child's orthopedic mattress.
Check the blanks of a double-tiered plywood with an electric jigsaw, glue the edge line, carefully clean the edges.
Like a fastening element and vicorist, light aluminum coils. Stink in front of you, open the door of the self-tapping.
Close the sidewalls behind the width of the sidewall with tufts from the inner side to the sheet, which plays the role of the bottom of the mattress.
Child gently turn over and fix the folds to the side slats. The height of the slats can be such as to make a child fall.
Heads for a child's bed can be cut from decals of decorative strips with endings, and carefully attached to the base.
For the handy storage of childish speeches, under the bottom of the bed of the typewriter from plywood, install hanging boxes. For this, an additional transverse bar is attached to the bottom - boxes can be knocked down along it.

The final décor hangs behind the damp bajan and the relish of a child. The right vitvir of the art is double-tiered softly from plywood with your own hands, or as a child, softly made from plywood with your own hands. For such a design, especially detailed armchairs are needed.

How do you make a single bed with your own hands?
- Arrangement of the frame lіzhka

To finish off with a part of the appearance of those who are the objects of the interior become irrelevant after the end of such a period of time.

All the objects of the interior break down from time to time and spend their own familiar look. Well, obviously, you can go to the street, or you can be kind and give life to a friend.

Іnuє kіlka variantіv, yakі allow you to correct this situation. Їх it is possible to vikoristati stalely according to your names. So, you can get out of the problem as radically, so even more loyally. Prior to the first lay the liquidation of sealed objects. For example, you can inherit the Italians, yakі zgіdno zgіdno z tradition on New river distill old speeches at the vikno. But before that, not everything is ready. Aja is given a procedure for transferring those who, in this process, you can, possibly, take important objects, for example, lying or shafi. As a result, you will have to bathe a new river. Tsya procedure is not dermal for the intestines, it’s more so that these vitrati don’t have to be overwhelmed. To that it is brought wine to find yakіs іnshi varianty vyrіshennya tsgogo zavdannya. The next option is to transfer the repair of evil speech. Aje, we can’t accept anything for those who give new life already dosit to summer subjects.

Sob tse bezpechiti, for an hour I’ll do it a lot of navit more folding manipulations. The first option is to transfer those that replace the broken object (for example, if the repair is no longer possible), you can make a style, wardrobe, or just with your own hands. It’s more difficult for someone to do it, even though someone copes well with the set tasks literally for medical treatment. Golovne, what you need to know, tse those, what you need to correctly select the choice of materials for the life of that other subject.

How do you make a single bed with your own hands?

Instead of old and wicked furniture, You can choose a new single bed.

Otzzhe, as it was appointed, early chi pizno all the same be brought to zdiisnyuvat vyscheznyuvati vybir. It’s easy to do it well, but still it’s often necessary to do it in such a way that the most necessary and suitable option becomes the very need for self-supporting repairs or full life various subjects interior. One of the simplest such subjects for independent education is easy. It is especially awkward to fold a single bed. If you don’t look at the design of your life, then you will be able to find the best materials and tools. The drive for this "experiment" may be those who, in the process of going shopping, it is practically impossible to know the need to know. Even those that are appropriate for you according to all criteria, can be selected for purchase. What practically cannot be said about the range of furniture stores.

If you didn’t know in the shops it’s easy - don’t be embarrassed, work it out yourself.

So, many people say that those specimens, which are suitable for a potential purchase in the price category, do not depend on their other characteristics, they can be suitable. Htos vіdznaє krihkіst materіalіv, for example, that lіzhka vykonanі z pressed tirsi, and z'єdnannya mіzh with warehouse parts so hitkі y nemіcnі, scho navіt pіslya pridbannya cgogo goods you vlasnoruch happen to be able to dorobljati or pravnіtyu. The axis of what is often done to the mind in the closet of everyday life and the improvement of the will to help the process with their wet hands. The only change for the creation of the conceived can be the human line. To that, as you have been called upon for this purpose, it is necessary to try not to act in the same way and not to add that chi to the right for tomorrow.

Turn to hell

What do you need to make your own bed with your own hands?

For everyday life, you need to use dry sanding boards.

For the cob, obviously, it is necessary to bring all the material that will be needed for a single bed. Nasampered, there will be wood lumber. For one bed, it is necessary to stock up on approximately 15 linear meters of boards, so that you can go on the trail. It is important here that the boards are freshly dried. Otherwise, you will have to spend more than a day for a thousand hours, for which the stench will be hung.

This is necessary for the fact that it does not dry out and does not deform by stretching without a middle whisker.

The laces and the materials used become approximately 150 mm, and the laces - close to 3 cm. For this, no more than 1000 rubles are needed.

Also plywood is necessary for you for sporudzhennya l_zhka.

For wooden planks, you need more plywood, the dimensions of which should be folded into a tovshchina 1 cm, and in width and in a dozhina - five meters each (1500 rubles). Krim tsikh two warehouses (boards and plywood), you need:

Farba.
Emery paper.
Penzlik.
Legs for lying.
Joiner's glue.
Screws for fastening okremih details.
Kutochki.

Approximately 2000 rubles will be stained on the wall. In this rank, the total cost of undertaking is about 4,500 rubles. As it is necessary, it will be necessary to buy various other details for a sum that does not exceed 1000 rubles. If you try and don’t waste your time on those who know cheap goods in various stores and at weekly bases, then the quality of your life will be less.

Turn to hell

The main stages of making a single bed with your own hands

Pіslya moreover, yak uѕі materials pridbanі, and іnstrumenti pіdgotovіnі, it will be necessary to proceed directly to the process of arranging this subject inter'єru. Everything starts from the preparation of plywood. For a single bed, it is necessary to make such a sheet, which becomes approximately 195 * 92 cm.

Scheme of expansion of a single bed.

If you are lucky with carpentry skills, then you will be able to work the first time, and you will not need another sheet. But remember that you need to work more carefully and carefully. And it’s best to solve the problem in this way. Do not bother to pick up the right material, which you will know in the first store, in which you will use it. At most vipadkіv plywood is sold at the same quiet rosem, if it was ordered earlier, but later on, the leaves of the larger roses, for example, plywood sheets, dozhina such become not 1.5, but 2 m. .